Sharp AR-M205 AR-M160 AR-M205 Operation Manual - Page 32

DUAL PAGE COPYING A dual page original can be automatically separated into two pages during copying. This feature is convenient for making copies of books and other dual page originals on individual sheets of paper. Original Copy Note • 8-1/2" x 11" paper is used for dual page copying. • When rotation copy is enabled (the dual function board must be installed) 8-1/2" x 11"R paper can also be used. • Dual page copying can be enabled when two-sided copying is enabled. • Dual page copying can be enabled when Sort/Group copy (p.32). • When used in combination with XY ZOOM copying, enlargement is not possible. • Dual page copying cannot be used in combination with the following functions: • Enlargement • 2 IN 1/4 IN 1 copying (when the dual function board is installed) • Center erase (when the dual function board is installed) • Automatic ratio selection cannot be used when dual page copying is used. • Dual page copying cannot be selected when an original is placed in the SPF/RSPF. 1 Place the original on the document glass, aligning the division between the pages with the size marker ( 81/2). Close the document cover/SPF/RSPF. Copying will begin from the page to the right of the size marker. 81/2 Note To keep the copies in the correct page order when performing dual page copying over multiple pages, make sure that the original is always placed on the document glass with the smaller page number to the right. 3 Use the [TRAY SELECT] key ( ) to select the paper tray with the "8-1/2" x 11" size. 4 Set the number of copies and other copy settings, and press the [START] key ( ). The copy will be delivered to the paper output tray. Note To cancel dual page copying, press the [DUAL PAGE COPY] key. The DUAL PAGE COPY indicator will go off, indicating that the function is canceled. 2 Press the [DUAL PAGE COPY] key and make sure that the DUAL PAGE COPY indicator is lit. DUAL PAGE COPY 30