Sharp AR-M205 AR-M160 AR-M205 Operation Manual - Page 21
Copying from the SPF/RSPF
View all Sharp AR-M205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
COPY FUNCTIONS Copying from the SPF/RSPF 1 Make sure that an original has not been left on the document glass. Close the SPF/RSPF. 2 Adjust the original guides to the size of the original(s). 5 Press the [START] key ( ) to begin copying. START The copy is delivered to the paper output tray. 3 Set the original(s) face up in the document feeder tray. G Insert the original into the document feeder tray as far as it will go. When the original is set, the SPF/RSPF indicator will light up. G The ORIGINAL SIZE indicator corresponding to the size of the original lights up. G Make sure that the ORIGINAL TO COPY indicators are not lit. (When automatic two-sided copying is supported.) G Make sure that the PAPER SIZE indicator is lit. G If the indicator is not lit, no tray has the same size of paper as the original. Load paper of the required size in a tray, or select the bypass tray with the [TRAY SELECT] key ( ) and copy from the bypass tray. G The bypass tray must be manually selected. G To copy on paper of a different size than the original, select the paper with the [TRAY SELECT] key ( ). Note Do not place originals of different sizes together in the document feeder tray. This may cause misfeeds. 4 Set the number of copies. Note • The paper output tray can hold up to 250 sheets of paper. • About one minute after copying ends, "Auto clear timer" activates and restores the copy settings to the initial settings. (p.12) The setting for "Auto clear time" can be changed in the user programs. (p.44) • Press the [CLEAR] key ( ) to stop copying in the middle of a run. • If you find it difficult to remove the original from the document feeder tray, open the feeding roller cover first and then remove the original. If you remove the original without opening the feeding roller cover, the original may become dirty. 2 19