Sharp AR-M205 AR-M160 AR-M205 Operation Manual - Page 17
Loading the bypass tray, Important points when inserting paper in the bypass tray - fax
View all Sharp AR-M205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Loading the bypass tray 1 Unfold the bypass tray. When feeding large paper such as 8-1/2" x 14" and 11" x 17", pull out the bypass tray extension. BEFORE USING THE MACHINE 3 Insert the paper (print face down) all the way into the bypass tray. To prevent a misfeed, verify once more that the paper guides are adjusted to the width of the paper. Note If you loaded paper in the bypass tray, press the [TRAY SELECT] key ( ) to select the bypass tray. The bypass tray will not be selected automatically. 1 2 Set the paper guides to the copy paper width. Important points when inserting paper in the bypass tray • Up to 100 sheets of standard copy paper can be set in the bypass tray. • Be sure to place 5-1/2" x 8-1/2" size paper or envelopes horizontally as shown in the following diagram ( ). • When loading envelopes, make sure that they are straight and flat and do not have loosely glued construction flaps (not the closure flap). • Special papers except SHARP recommended transparency film, labels, and envelopes must be fed one sheet at a time through the bypass tray. • When adding paper, first remove any paper remaining in the tray, combine it with the paper to be added and then reload as a single stack. The paper to be added must be the same size and type as the paper already in the tray. • Do not use paper that is smaller than the original. This may cause smudges or unclean images. • Do not use paper that has already been printed on by a laser printer or plain paper fax machine. This may cause smudges or unclean images. 15