Sony BVM-HX3110 Operating Instructions - Page 103
Status, The operating status of the PTP is displayed.
View all Sony BVM-HX3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Status The operating status of the PTP is displayed. Item Active PTP Network Lock Status Description Indicates whether PTP being received on the LAN1 or the LAN2 network is being used as the source for the PTP synchronization of a device. The lock status of the PTP is displayed as follows. Network Jitter Network Delay Sync Packets Follow Up Packets Delay Request Packets Delay Response Packets UTC Time GM ID PTP leader ID PTP leader IP Priority 1 Priority 2 Step Announce Message Interval Announce Timeout Not In Use: PTP is not used. Freerun: No PTP leader exists. Locked: PTP is locked. Locking: PTP is about to be locked. Displays the Jitter value of the PTP message between the PTP leader and the device. Displays the Delay value of the PTP message between the PTP leader and the device. Displays the number of Sync packets per second received from the PTP leader. Displays the number of Follow Up packets per second received from the PTP leader. Displays the number of Delay Request packets per second that the device is sending. Displays the number of Delay Response packets per second received from the PTP leader. The UTC time is displayed. Displays the grandmaster ID (Grand master clock Identity) included in the PTP leader Announce message. Displays the ID of the PTP leader. Display the IP address of the PTP leader. Priority 1 for the PTP leader is displayed. Priority 2 for the PTP leader is displayed. Displays the number of steps (One-step or Two-step) in the Sync and Follow Up messages. Displays the interval between Announce messages sent by the PTP leader. Displays the number of times before the PTP leader Announce message times out. 103