Sony BVM-HX3110 Operating Instructions - Page 50
Multi View menu
View all Sony BVM-HX3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Multi View menu Video display is set to multiple views. Quad View Submenu Screen A Setting to Screen D Setting Conversion Assign Setting Select the channel to be displayed in each view. For Screen C and Screen D, you can also select Scope as well as Channel. Screen C can be selected from the Scope of Screen A, Screen B and Screen D. Screen D can be selected from the Scope of Screen A, Screen B and Screen C. Name: The selected channel name is displayed. Input Select: The input signal set for the selected channel is displayed. 4K/2K SDI Input1 4K/2K SDI Input3 4K SDI Input1,2,3&4 4K SDI Input1&2 4K SDI Input3&4 4K SDI Input1 4K SDI Input3 2K SDI Input1&2 2K SDI Input3&4 2K SDI Input1 2K SDI Input2 2K SDI Input3 2K SDI Input4 HDMI 4K/2K IP Input1 2K IP Input2 4K/2K IP Input3 2K IP Input4 When the Conversion (HDR SDR Conversion) function is enabled, select the display screen to be applied. (Default value: Screen B) Screen A Screen B Screen C Screen D Submenu EMO Assign Setting Select the display screen that will display the input image of the SDI signal output from the Enhanced Monitor Out terminal. (Default value: Screen B) Screen A Screen B Screen C Screen D Notes When "Out. Image(Single)" (page 71) in the "Enhanced Out." menu is set to "Fixed", "Quad View" cannot be set to On. "Conversion Assign" is available when the optional "BVML-H10" license (sold separately) is enabled. "EMO Assign" is available when one of the optional "BVML-H10", "BVML-S10" or "BVMLT10" licenses (sold separately) is enabled. About the Quad View setting When Quad View is set to On using the function button, the four HD resolution input signals are displayed on Screen A to Screen D. Notes The 4K equivalent signal cannot be displayed with Quad View. XYZ format signals are not supported. Only one channel per input terminal can be displayed simultaneously. Example: If "Ch.1" and "Ch.2" is set to the same SDI input connector 1, they cannot be displayed at same time. To compare the same image, input the image of input connector 1 to the other connector and set "Ch.2" to the input connector. When a combination which cannot be displayed simultaneously is set, the screen which can be displayed is displayed in order from Screen A. If the screen cannot be displayed, it turns black and the "Invalid Input Combination" message is displayed. 50