Sony BVM-HX3110 Operating Instructions - Page 64
Parallel Remote, Confirm, a message for executing Cancel
View all Sony BVM-HX3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Notes After setting each item, select either Confirm or Cancel. After setting, when you press the "BACK" button without executing Cancel or Confirm, a message for executing Cancel/ Confirm is displayed. Select either one and execute it. As for the settings from the broadcast controller and the manual settings of "IP Multicast", the ones configured last are enabled. Submenu Setting LAN1 In.1 V Multicast Addr. Set the multicast address of the video data. (Default value: 000.000.000.000) 000.000.000.000 224.000.002.000 - 239.255.255.255 V Port No. Set the video data port number. (Default value: 30000) 100 - 65535 V Source Addr. Set the IP address of the video data source. (Default value: 000.000.000.000) 000.000.000.000 - 255.255.255.255 A Multicast Addr. Set the multicast address of the audio data. (Default value: 000.000.000.000) 000.000.000.000 224.000.002.000 - 239.255.255.255 A Port No. Set the audio data port number. (Default value: 30000) 100 - 65535 A Source Addr. Set the IP address of the audio data source. (Default value: 000.000.000.000) 000.000.000.000 - 255.255.255.255 M Multicast Addr. Set the multicast address of the ancillary data (Metadata). (Default value: 000.000.000.000) 000.000.000.000 224.000.002.000 - 239.255.255.255 M Port No. Set the ancillary data (Metadata) port number. (Default value: 30000) 100 - 65535 M Source Addr. Set the IP address of the ancillary data (Metadata) source. (Default value: 000.000.000.000) 000.000.000.000 - 255.255.255.255 LAN1 In.2 The setting items and the setting values are the same as those for LAN1 In.1. LAN1 In.3 The setting items and the setting values are the same as those for LAN1 In.1. LAN1 In.4 The setting items and the setting values are the same as those for LAN1 In.1. Submenu LAN2 In.1 LAN2 In.2 LAN2 In.3 LAN2 In.4 Cancel Confirm Power On Setting Save To Preset Load From Preset Setting The setting items and the setting values are the same as those for LAN1 In.1. The setting items and the setting values are the same as those for LAN1 In.1. The setting items and the setting values are the same as those for LAN1 In.1. The setting items and the setting values are the same as those for LAN1 In.1. Restores the changed or confirmed settings to the state before change. Saves and applies the changed or confirmed settings. Select whether to use the multicast address setting value configured last or a preset value when powered on. (Default value: Last Memory) Last Memory Preset Save the multicast setting value to the preset. Cancel: Saving is canceled and no saving is done. Confirm: Executes saving to the preset. Read the preset data and apply it to the multicast setting value. Cancel: Reading is canceled and no reading is done. Confirm: Read the preset data and apply it to the multicast setting value. Parallel Remote 64