Sony BVM-HX3110 Operating Instructions - Page 29
User Color Temp., Example: When Clean Switch is set
View all Sony BVM-HX3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Submenu V Compression A Interpolation Audio CH Copy From Cancel Confirm Setting Image Format: According to the frame rate of the input IP stream video data, select the image format from the following. The image format of the frame rate set in "Frame Rate" becomes enabled. 59.94/29.97: 1080/59.94P_3G, 1080/59.94I_1.5G, 1080/ 29.97PsF_1.5G, 720/ 59.94P_1.5G 50/25: 1080/50P_3G, 1080/ 50I_1.5G, 1080/25PsF_1.5G, 720/50P_1.5G 24: 1080/24PsF_1.5G 23.98: 1080/23.98PsF_1.5G Select whether the input IP stream video data is in uncompressed (Uncompressed) format or in compressed (JPEG XS) format. Uncompressed JPEG XS If there is an excess or shortage in audio data, select whether to complement (Interpolate) the data. Disable: Does not perform the data interpolation. Enable: Performs the data interpolation. Select the number of incoming channels for the audio data. 2CH 4CH 8CH 16CH Copy other IP input configuration preset data to the selected IP input configuration preset. You can select from "Preset 1" to "Preset 10". Restores the changed or confirmed settings to the state before change. Saves and applies the changed or confirmed settings. Notes The IP stream bandwidth for available input is 24G/12G by disabling/enabling the Clean Switch regardless of whether the video data is in a compressed or uncompressed format. According to the priority, the bandwidth of the input signal set in each "IP Input" is added. If the total is within the bandwidth for available input, the "IP Input" is judged to be valid (Valid), and if it is outside the bandwidth, the "IP Input" is judged to be invalid (Invalid). If "No Assign" is set to "Priority", the "IP Input" is invalid (Invalid). Example: When "Clean Switch" is set as "Disable" (bandwidth for available input: 24G) IP Input1 Priority1 2160/50P 12G Valid IP Input2 Priority3 1080/50P 3G Invalid IP Input3 Priority2 2160/50P 12G Valid IP Input4 Priority4 1080/50P 3G Invalid Example: When "Clean Switch" is set as "Enable" (bandwidth for available input: 12G) IP Input1 No Assign 2160/50P 12G Invalid IP Input2 Priority4 1080/50P 3G Valid IP Input3 Priority3 2160/25P 6G Valid IP Input4 Priority2 1080/50P 3G Valid After setting, when you press the "BACK" button without executing Cancel or Confirm, a message of executing Cancel/Confirm is displayed. Select either one and execute it. "JPEG XS" under "V Compression" can be set when the optional "BVML-JD10" license (sold separately) is activated. User Color Temp. You can select and adjust the color temperature. When using a measurement instrument for color temperature adjustment, Konica Minolta Color Analyzer CA-310/410 is recommended. Submenu User Color Temp. Name R/G/B Gain R/G/B Bias Setting Select the color temperature setting to be adjusted. Sets the color temperature name. Adjusts the color balance (gain) of R (red)/G (green)/B (blue). Adjusts the color balance (bias) of R (red)/G (green)/B (blue). (Default value: 0) Note Check the black level with the PLUGE signal, etc. after adjusting the color temperature, and adjust the black level under "Brightness" of "Chr./Bright./ Cont." in "Ch. Setting" as necessary. 29