Sony BVM-HX3110 Operating Instructions - Page 88
Enhanced Monitor Out
View all Sony BVM-HX3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Enhanced Monitor Out This function is available by enabling one of the optional "BVML-H10", "BVML-S10" or "BVML-T10" licenses (sold separately). The video signal displayed on the screen is synchronized with the input SDI/IP stream and output as an SDI signal from the ENHANCED MONITOR OUT connector. It enables 3G/HD-SDI MultiLink to 12G/6G-SDI Single-Link conversion and 4K/UHD to 2K/HD signal conversion as well as selecting Video Range (Full Range/Limited Range) for output. 1) It also allows the output of User LUT-applied signals and HDR-SDR converted signals. See page 131 for the correspondence table between input SDI/ IP stream video data signal formats and output SDI signal formats. 1) "BVML-T10" is not supported. Notes HDMI input signals cannot be output. The signal structure is fixed at 4:2:2 YCbCr 10bit. The superimposed output (transmission) of Embedded Audio data and Time Code data of Ancillary Data (auxiliary data) is supported, but the superimposed output (transmission) of Closed Caption and SR Live Metadata is not supported. Embedded Audio supports 48 kHz sampling Audio signals. When the input signal is 4096×2160, 2048×1080 60P, 30P or 30PsF (including frame rate 1/1.001), it corresponds to 1-8CH, and when the input signal is other than these, it corresponds to 1-16CH. The following shows the specifications of OETF, color space (gamut), and Transfer Matrix (transfer matrix) output from the ENHANCED MONITOR OUT connector when the User LUT function and HDR-SDR conversion function are ON/OFF. The state in which the User LUT data is applied in "User LUT" in "Ch. Setting" is referred to as User LUT function ON. User LUT function OFF ON OFF ON HDR-SDR OETF Conversion function OFF Retains input signal specifications 1) OFF Retains OETF specifications for LUT output 1) ON SDR Color Space Retains input signal specifications Retains color space specifications for LUT output Setting values of "Out. Color Space" in "Conv. Preset" ITU-R BT.709 ITU-R BT.2020 Transfer Matrix Matrix of the color space setting values in the "VPID/HDMI Auto" and "SR Live Auto" settings or the "Color Space" in "Ch. Setting." ITU-R BT.709 ITU-R BT.2020 However, if it is a matrix other than ITU-R BT.709/ITU-R BT.2020, ITU-R BT.709 matrix will be applied. Matrix of the color space setting values in the "VPID/HDMI Auto" and "SR Live Auto" settings or the "Color Space" in "Ch. Setting." ITU-R BT.709 ITU-R BT.2020 However, if it is a matrix other than ITU-R BT.709/ITU-R BT.2020, ITU-R BT.709 matrix will be applied. Matrix for setting values of "Out. Color Space" in "Conv. Preset" ITU-R BT.709 ITU-R BT.2020 88