Sony BVM-HX3110 Operating Instructions - Page 83
Color Space, Color SpaceColor Gamut in HDR SDR Relation Table take precedence.
View all Sony BVM-HX3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Auto" and "VPID/HDMI Auto" are both set to "On," the settings of "Transfer Matrix," "OETF," and "Color Space(Color Gamut)" in HDR SDR Relation Table take precedence. The two modes are available for reflecting the HDR SDR Relation Table. See page 53. This unit does not support the following functions of HDR SDR Relation Table. No.17 Knee Saturation No.18 Knee Saturation Level No.19 Soft Knee No.20 Knee Radius No.23 HDR Knee No.24 HDR Knee Point No.25 HDR Knee Slope The OETF and color space (color gamut) of pre-conversion HDR signals that support SDR conversion are as follows. If an unsupported OETF or color space (color gamut) is selected, the HDR-SDR conversion function will not be enabled. OETF S-Log3(Live HDR) ITU-R BT.2100(HLG) SMPTE ST 2084(PQ) S-Log3 Color Space ITU-R BT.2020 ITU-R BT.709 When the OETF of the input HDR is other than ITU-R BT.2100 (HLG) and the HDR Look is Natural, "Conversion Mode" is processed as "SR AIR Off" regardless of its setting value. 5 Press the function button to which you assigned "Conversion" in step 1. This unit automatically sets EOTF to 2.4(SDR) and color space (color gamut) to match "Out. Color Space" of "Conv. Preset," then displays the SDR converted signal on the screen. Also, the SDR conversion signal is output as an SDI signal from the ENHANCED MONITOR OUT connector. 83