Sony BVM-HX3110 Operating Instructions - Page 37
Black Level, HDR SDR Gain, Gamma Table, Gamma Step, Gamma Level, SDR White Clip
View all Sony BVM-HX3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Submenu HDR Look HDR Black Comp. Out. OETF Out. Color Space HDR SDR Setup Setting Select the video characteristics from "Live", "Mild", and "Natural" that determine how the video signal captured by cameras will be represented as an HDR image on the monitor. This function is available only when "SR AIR On" is selected in "Conversion Mode." Use the same settings as that for the HDR Look function on your camera. When the OETF of the input HDR is other than HLG and the HDR Look is Natural, "Conversion Mode" is processed as "SR AIR Off" regardless of its setting value. For "Live," "Mild," and "Natural," refer to "HDR-SDR Conversion" (page 81). Sets On/Off for the HDR Black Compression function (a function to submerge the black level of HDR images to match the black level of SDR images). Use the same settings as that for the HDR Black Compression function on your camera. If "Conversion Mode" is "Display Referred," this parameter is fixed to "Off." Displays the output signal OETF (SDR fixed). When the Conversion function is turned on, the unit automatically sets EOTF to 2.4(SDR) for the screen display. Select the color gamut of the output signal between "ITU-R BT.709" and "ITU-R BT.2020." When the Conversion function is turned on, the unit automatically adjusts the color space to match the "Out. Color Space" setting for the screen display. Configures the HDR to SDR conversion settings. Black Level: Adjusts input and output black levels. Setting Mode: Selects whether or not the input video signal source is a Sony system camera from "Sony System Cam." or "Others." Master Black: Sets the master black value of an input video signal source. This setting is enabled when "Setting Mode" is set to "Sony System Cam." HDR Blk. Ofst.: Sets the HDR black offset value of an input video signal source. This setting is enabled when "Setting Mode" is set to "Sony System Cam." Submenu 37 Setting In. Black Level: Sets the black level value (HDR) of an input signal. This setting is enabled when "Setting Mode" is set to "Others." Out. Blk. Lvl.: Sets the black level value (SDR) of an output signal. This setting is enabled when "Setting Mode" is set to "Others." When "Conversion Mode" is "Display Referred," "Master Black," "HDR Blk. Ofst.," "In. Black Level" and "Out. Blk. Lvl." are fixed at "0.0." HDR SDR Gain: Sets the gain amount for HDR to SDR conversion. HDR Contrast: Shows the percentage of HDR when converted to 100% of SDR with the gain amount set by HDRSDR Gain. Knee: Sets the Knee (high brightness compression) function On/Off for HDR to SDR conversion. When "Gamma Table" is "Hyper," "Knee" is fixed to "Off" regardless of its setting value. Point: Sets the knee point position for the Knee function. Even if the set value is changed, the actual knee point position may not change. Slope: Sets the knee slope for the Knee function. Gamma Table: Select the gamma curve type from "Standard" or "Hyper." If "Conversion Mode" is "Display Referred," the internal fixed value is applied. Standard: Select a value from "1" to "7." Hyper: Select a value from "1" to "4." Gamma Step: Sets the gamma intensity (step). When "Conversion Mode" is "Display Referred" or when "Gamma Table" is other than "Standard," this parameter will be invalid regardless of its setting value. Gamma Level: Sets the gamma intensity (analog). When "Conversion Mode" is "Display Referred" or "Gamma Table" is other than "Standard," this parameter will be fixed at "0" regardless of its setting value. SDR White Clip: Sets the white clipping function On/Off for HDR to SDR conversion. Level: Sets the video level for white clipping.