Sony BVM-HX3110 Operating Instructions - Page 79
LUT type settings Type I / Type II / Type III
View all Sony BVM-HX3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Input signal (Video Range) Limited Range Full Range S-Log3 signal Input Range settings Limited to Full No Scaling S-Log Range Output Range settings Full to Limited No Scaling(Full) Internal fixed value LUT type No.1 No.8 No.12 When "Auto" is set to "On" and "EOTF" in "Ch. Setting" is set to "S-Log3(Live HDR)" or "S-Log3," LUT input and output are identified as S-Log3 signals, and Input is set to "S-Log Range." Both RGB/YCC Range and Output are set to internal fixed values regardless of the settings. 5 Set "EOTF" and "Color Space" values in "Ch. Setting" according to the OETF and color space (gamut) specifications for LUT output. The signal to which the LUT data has been applied is displayed on the screen. With the optional "BVML-H10" license (sold separately), LUT-applied signals can be output as SDI signals from the ENHANCED MONITOR OUT connector. LUT type settings (Type I / Type II / Type III) The setting values for each LUT type are shown below. The LUT types, Type I/Type II/Type III, are referenced from "BBC_HDRTV_HLG_LUT_Implementation_Guide.pdf" published by BBC Research & Development. The following setting procedure assumes that "VPID/HDMI Auto" and "SR Live Auto" are "Off." Also, for the settings "Input" and "Output" below, set "Auto" of "User LUT Range" to "Off". Type I -For Limited Range input signals Equivalent to supported LUT type No. 1. Set up as follows. "RGB/YCC Range": "Limited" "Transfer Matrix": Set the YCbCr to RGB transfer matrix for YCbCr input "Input": "Limited to Full" "Output": "Full to Limited" "EOTF": Set this parameter according to the OETF specifications for LUT output "Color Space": Set this parameter according to the color space (color gamut) specifications for LUT output. -For Full Range input signals Equivalent to supported LUT type No. 8. Set up as follows. "RGB/YCC Range": "Full" "Transfer Matrix": Set the YCbCr to RGB transfer matrix for YCbCr input "Input": "No Scaling" "Output": "No Scaling(Full)" "EOTF": Set this parameter according to the OETF specifications for LUT output "Color Space": Set this parameter according to the color space (color gamut) specifications for LUT output. -For S-Log3 (Full Range) input signals Equivalent to supported LUT type No. 12. Set up as follows. "Transfer Matrix": When inputting YCbCr, set the matrix for YCbCr to RGB conversion. "Input": "S-Log Range" ( "RGB/YCC Range" is set to the internal fixed value) "EOTF": "S-Log3(Live HDR)" or "S-Log3" ( "Output" is set to the internal fixed value) "Color Space": Set this parameter according to the color space (color gamut) specifications for LUT output. Note For Type I mentioned above, the Input/Output setting of "User LUT Range" is the same as the setting when "Auto" of "User LUT Range" is "On." 79