Sony BVM-HX3110 Operating Instructions - Page 24

User Preset Setting menu, Ch. Setting

Get Sony BVM-HX3110 PDF manuals and user guides View all Sony BVM-HX3110 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

User Preset Setting menu All channel settings can be configured or adjusted. You can also copy the setting values from one channel to apply them to another. Ch. Setting The input signal and video settings can be adjusted. Submenu Ch. No Name Input Select Setting Select the channel to be configured. Sets the channel name. Select the connector and signal from the following.  4K/2K SDI Input1  4K/2K SDI Input3  4K SDI Input1,2,3&4  4K SDI Input1&2  4K SDI Input3&4  4K SDI Input1  4K SDI Input3  2K SDI Input1&2  2K SDI Input3&4  2K SDI Input1  2K SDI Input2  2K SDI Input3  2K SDI Input4  HDMI  4K/2K IP Input1  2K IP Input2  4K/2K IP Input3  2K IP Input4 Notes  4K/2K SDI Input1 and 4K/2K SDI Input3 automatically distinguish between 4K and 2K signals.  When selecting 4K/2K IP Input1, 2K IP Input2, 4K/2K IP Input3, or 2K IP Input4, make sure to set "IP In. Power Down" (page 70) in the "System" menu to "Off". Submenu VPID/HDMI Auto SR Live Auto Setting  When selecting 4K/2K IP Input1, 2K IP Input2, 4K/2K IP Input3, or 2K IP Input4, make sure to set IP signal configuration with "IP Input Config." (page 27) in advance.  On: "RGB/YCC Range," "EOTF," "Color Space," and "Transfer Matrix" are automatically set as appropriate based on the Payload ID (VPID) signal information when the SDI/IP stream (ancillary data) is input, and set as appropriate based on the HDMI InfoFrame signal information when the HDMI signal is input.  Off: When "SR Live Auto" is "On," the setting conditions are followed. When "SR Live Auto" is "Off," the values set for "RGB/YCC Range," "EOTF," "Color Space," and "Transfer Matrix" are used.  On: Automatically sets a group of items required for conversion settings from HDR signal to SDR signal of "EOTF," "Color Space," "Transfer Matrix" and "Conv. Preset." The settings are configured according to the HDR SDR Relation Table (items that need to be set to generate SDR signals from HDR signals) included in the SR Live Metadata of the input SDI/IP stream (ancillary data). For items for which SR Live Metadata does not exist or is invalid, the setting value for the corresponding item in the conversion preset data is applied. When OETF of HDR SDR Relation Table is S-Log3, "EOTF" is automatically set to "SLog3(Live HDR)." When both "SR Live Auto" and "VPID/HDMI Auto" are "On," the HDR SDR Relation Table information of "SR Live Auto" takes precedence over the settings of "EOTF," "Color Space" (Color Gamut) and "Transfer Matrix."  Off: When "VPID/HDMI Auto" is "On," the setting conditions are followed. When "VPID/HDMI Auto" is "Off," the values set in "EOTF," "Color Space," "Transfer Matrix" and "Conv. Preset" are used for a group of items required for the HDR signal to SDR signal conversion settings. 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
24
User Preset Setting menu
All channel settings can be configured or
adjusted. You can also copy the setting values
from one channel to apply them to another.
Ch. Setting
The input signal and video settings can be
adjusted.
Submenu
Setting
Ch. No
Select the channel to be configured.
Name
Sets the channel name.
Input Select
Select the connector and signal from
the following.
4K/2K SDI Input1
4K/2K SDI Input3
4K SDI Input1,2,3&4
4K SDI Input1&2
4K SDI Input3&4
4K SDI Input1
4K SDI Input3
2K SDI Input1&2
2K SDI Input3&4
2K SDI Input1
2K SDI Input2
2K SDI Input3
2K SDI Input4
HDMI
4K/2K IP Input1
2K IP Input2
4K/2K IP Input3
2K IP Input4
Notes
4K/2K SDI Input1 and 4K/2K SDI
Input3 automatically distinguish
between 4K and 2K signals.
When selecting 4K/2K IP Input1, 2K
IP Input2, 4K/2K IP Input3, or 2K IP
Input4, make sure to set “IP In.
Power Down” (page 70) in the
“System” menu to “Off”.
When selecting 4K/2K IP Input1, 2K
IP Input2, 4K/2K IP Input3, or 2K IP
Input4, make sure to set IP signal
configuration with “IP Input Config.”
(page 27) in advance.
VPID/HDMI Auto
On:
“RGB/YCC Range,” “EOTF,”
“Color Space,” and “Transfer
Matrix” are automatically set as
appropriate based on the
Payload ID (VPID) signal
information when the SDI/IP
stream (ancillary data) is input,
and set as appropriate based
on the HDMI InfoFrame signal
information when the HDMI
signal is input.
Off:
When "SR Live Auto" is "On," the
setting conditions are followed.
When "SR Live Auto" is "Off,"
the values set for “RGB/YCC
Range,” “EOTF,” “Color Space,”
and “Transfer Matrix” are used.
SR Live Auto
On:
Automatically sets a group of
items required for conversion
settings from HDR signal to SDR
signal of "EOTF," "Color Space,"
"Transfer Matrix" and "Conv.
Preset."
The settings are configured
according to the HDR SDR
Relation Table (items that need
to be set to generate SDR
signals from HDR signals)
included in the SR Live
Metadata of the input SDI/IP
stream (ancillary data).
For items for which SR Live
Metadata does not exist or is
invalid, the setting value for the
corresponding item in the
conversion preset data is
applied.
When OETF of HDR SDR
Relation Table is S-Log3, "EOTF"
is automatically set to "S-
Log3(Live HDR)."
When both "SR Live Auto" and
"VPID/HDMI Auto" are "On," the
HDR SDR Relation Table
information of "SR Live Auto"
takes precedence over the
settings of "EOTF," "Color
Space" (Color Gamut) and
"Transfer Matrix."
Off:
When "VPID/HDMI Auto" is
"On," the setting conditions are
followed. When "VPID/HDMI
Auto" is "Off," the values set in
"EOTF," "Color Space," "Transfer
Matrix" and "Conv. Preset" are
used for a group of items
required for the HDR signal to
SDR signal conversion settings.
Submenu
Setting