Sony BVM-HX3110 Operating Instructions - Page 130
:4YCbCr8bit signal or 4:2:2YCbCr12bit signal as the input signal.
View all Sony BVM-HX3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Signal System 3840 × 2160/25P 2) 3840 × 2160/24P 1) 2) 4096 × 2160/30P 1) 2) 4096 × 2160/25P 2) 4096 × 2160/24P 1) 2) 3840 × 2160/60P 1) 2) 3840 × 2160/50P 2) 4096 × 2160/60P 1) 2) 4096 × 2160/50P 2) 800 × 600/60P 1024 × 768/60P Signal Structure 4 : 4 : 4 (RGB) 4 : 4 : 4 (YCbCr) 4 : 2 : 2 (YCbCr) 4 : 4 : 4 (RGB) 4 : 4 : 4 (YCbCr) 4 : 2 : 2 (YCbCr) 4 : 4 : 4 (RGB) 4 : 4 : 4 (YCbCr) 4 : 2 : 2 (YCbCr) 4 : 4 : 4 (RGB) 4 : 4 : 4 (YCbCr) 4 : 2 : 2 (YCbCr) 4 : 4 : 4 (RGB) 4 : 4 : 4 (YCbCr) 4 : 2 : 2 (YCbCr) 4 : 4 : 4 (RGB) 4 : 4 : 4 (YCbCr) 4 : 2 : 2 (YCbCr) 4 : 2 : 0 (YCbCr) 4 : 4 : 4 (RGB) 4 : 4 : 4 (YCbCr) 4 : 2 : 2 (YCbCr) 4 : 2 : 0 (YCbCr) 4 : 4 : 4 (RGB) 4 : 4 : 4 (YCbCr) 4 : 2 : 2 (YCbCr) 4 : 2 : 0 (YCbCr) 4 : 4 : 4 (RGB) 4 : 4 : 4 (YCbCr) 4 : 2 : 2 (YCbCr) 4 : 2 : 0 (YCbCr) 4 : 4 : 4 (RGB) 4 : 4 : 4 (YCbCr) 4 : 2 : 2 (YCbCr) 4 : 4 : 4 (RGB) 4 : 4 : 4 (YCbCr) 4 : 2 : 2 (YCbCr) 12/10/8bit 3) 5) 12/10/8bit 3) 4) 12bit 12/10/8bit 3) 5) 12/10/8bit 3) 4) 12bit 12/10/8bit 3) 5) 12/10/8bit 3) 4) 12bit 12/10/8bit 3) 5) 12/10/8bit 3) 4) 12bit 12/10/8bit 3) 5) 12/10/8bit 3) 4) 12bit 8bit 3) 8bit 3) 12bit 3) 10/8bit 8bit 3) 8bit 3) 12bit 3) 10/8bit 8bit 3) 8bit 3) 12bit 3) 10/8bit 8bit 3) 8bit 3) 12bit 3) 10/8bit 12/10/8bit 12/10/8bit 12bit 12/10/8bit 12/10/8bit 12bit 1) Also compatible with the frame rate 1/1.001. 2) This signal is described as "equivalent to the 4K signal" in this manual. 3) "Enhanced Format" must be selected in the "HDMI In. Setting" (page 35). Also, when using this input signal, use the Premium High- Speed HDMI cable. (30P, 25P, 24P signals are only for the 4:4:4 RGB/YCbCr 10/12bit signal.) 4) The 4:4:4(YCbCr)12/10bit signal is displayed after converting to the 4:2:2(YCbCr)12/10bit signal. If it is not displayed correctly, use the 4:4:4(YCbCr)8bit signal or 4:2:2(YCbCr)12bit signal as the input signal. 5) The 4:4:4(RGB)12/10bit signal is displayed after converting to the 4:2:2(YCbCr)12/10bit signal. If it is not displayed correctly, use the 4:4:4(RGB)8bit signal or 4:2:2(YCbCr)12bit signal as the input signal. However, when AVI Info (signal information) cannot be detected and/or "RGB/YCC Range" is set to "Full," it is displayed as the 4:4:4(RGB)8bit signal if the input signal is determined as the Limited signal. 6) This signal system is not described in EDID (Extended Display Identification Data). 130