Sony BVM-HX3110 Operating Instructions - Page 105
Apply] button, Applies the multicast address settings.
View all Sony BVM-HX3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
[Apply] button Applies the multicast address settings. Item Description Power On Setting Select whether to use the multicast address setting value configured last or a preset value when powered on. (Default value: Last Memory) 4K/2K IP Input1 Video Status Displays the IP stream (video data) reception status. Receiving: An IP stream (video data) is being received. Available: An IP stream (video data) can be received but is not currently being received. Unavailable: An IP stream (video data) cannot be received. LAN1 Multicast address Set the multicast address of the video data. (Default value: 0.0.0.0) Port Set the video data port number. (Default value: 30000) Source address Set the IP address of the video data source. (Default value: 0.0.0.0) LAN2 The setting items and the setting values are the same as those for LAN1. Audio Status Displays the IP stream (audio data) reception status. Receiving: An IP stream (audio data) is being received. Available: An IP stream (audio data) can be received but is not currently being received. Unavailable: An IP stream (audio data) cannot be received. LAN1 Multicast address Set the multicast address of the audio data. (Default value: 0.0.0.0) Port Set the audio data port number. (Default value: 30000) Source address Set the IP address of the audio data source. (Default value: 0.0.0.0) LAN2 The setting items and the setting values are the same as those for LAN1. Meta Status Displays the IP stream (ancillary data) reception status. Receiving: An IP stream (ancillary data) is being received. Available: An IP stream (ancillary data) can be received but is not currently being received. Unavailable: An IP stream (ancillary data) cannot be received. LAN1 Multicast address Set the multicast address of the ancillary data (metadata). (Default value: 0.0.0.0) Port Set the ancillary data (metadata) port number. (Default value: 30000) Source address Set the IP address of the ancillary data (metadata) source. (Default value: 0.0.0.0) LAN2 The setting items and the setting values are the same as those for LAN1. 2K IP Input2 The setting items and the setting values are the same as those for 4K/2K IP Input1. 4K/2K IP Input3: The setting items and the setting values are the same as those for 4K/2K IP Input1. 2K IP Input4: The setting items and the setting values are the same as those for 4K/2K IP Input1. Setting value Last Memory Multicast Preset 0.0.0.0 224.0.2.0 - 239.255.255.255 100 - 65535 0.0.0.0 - 255.255.255.255 0.0.0.0 224.0.2.0 - 239.255.255.255 100 - 65535 0.0.0.0 - 255.255.255.255 0.0.0.0 224.0.2.0 - 239.255.255.255 100 - 65535 0.0.0.0 - 255.255.255.255 105