Sony BVM-HX3110 Operating Instructions - Page 106
SNMP Tab, SNMP Agent, Community Setting List
View all Sony BVM-HX3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
SNMP Tab Configure the SNMP settings. Note To use the SNMP function, the optional "BVML-SN10" license (sold separately) must be enabled. If disabled, the SNMP tab is not displayed. SNMP Agent Configure the basic settings on SNMP. Click the [Apply] button to apply the settings. Item SNMP Agent Port SysContact SysLocation Description Select whether to enable or disable the SNMP function. (Default value: Disable) Set the standby port number of this unit as the SNMP Agent. (Default value: 161) Set the system administrator information. Enter an email address by convention. Set the system location information. Setting Enable Disable 0 - 65535 Up to 64 ASCII code characters Up to 64 ASCII code characters Community Setting List Configure the settings on MIB access from the SNMP manager. Click the [Apply] button to apply the settings. Item Community Setting List Name Network Interface Version Mode Description Select whether to enable or disable the SNMP community. (Default value: Disable) Set the SNMP community name. Displays the corresponding network interface of this unit. (display only) Set the SNMP version. (Default value: V1 & V2C) Displays the access privilege for MIB information. (display only) Setting Enable Disable Up to 64 ASCII code characters 1st: LAN1&LAN2 2nd: LAN1&LAN2 V1 & V2C V2C READ ONLY 106