Sony BVM-HX3110 Operating Instructions - Page 45

Submenu Setting 1) When EOTF is set to 2.2, 2.4, 2.6, CRT or 2.4(HDR), the signal gradient is displayed. When EOTF is set to SMPTE ST 2084, the brightness for the input signal is displayed. When it is set to ITU-R BT.2100(HLG), the brightness of the input signal corresponding to the brightness of the monitor is displayed. The brightness is calculated from the default value of the System Gamma (page 25), and the display of the scale does not change even if you change the System Gamma settings. When EOTF is set to S-Log3 or S-Log3(Live HDR), the brightness for input signals defined in SR Live for HDR workflow is displayed. 2) The scale is fixed at Limited Range (-7% to 109%). 3) By this scale, the colors specified in Color Palette can be confirmed. Notes  While the screen saver is on, the false color scale is not displayed.  When Scale Display and Grid Display are both set to On, the lines of Grid Display are displayed on the false color scale, but this is not a malfunction. Col. Palette Preset Selects the color palette preset. The setting values can be confirmed and changed. Name Sets the color palette name. White Sets whether to colorize with the White palette. (Default value: Off)  On: Colorizes.  Off: Does not colorize. When "On" is selected  Lower limit: Sets a lower limit for the signal level of the palette. This can be set in the range of -7.3% to 109.5%. The upper limit of the White palette is fixed at 109.5% and cannot be changed. Red, Yellow, Orange, Pink, Light Pink, Cyan, Green, Light Blue, Blue, Purple Sets whether to colorize with the selected color palette. (Default value: On)  On: Colorizes.  Off: Does not colorize. When "On" is selected  Upper limit: Sets an upper limit for the signal level of the palette. This can be set in the range of -7.3% to 109.5%.  Lower limit: Sets a lower limit for the signal level of the palette. It can be set in the range of -7.3% to 109.5%. Submenu Black Copy From Setting Sets whether to colorize with the Black palette. (Default value: Off)  On: Colorizes.  Off: Does not colorize. When "On" is selected  Upper limit: Sets an upper limit for the signal level of the palette. This can be set in the range of -7.3% to 109.5%. The lower limit of the Black palette is fixed at -7.3% and cannot be changed. Notes  If a colorizing range is set for multiple colors, the color with the highest upper limit is applied. Depending on the conversion by EOTF or Color Space, even the same color will look slightly different.  When EOTF is set to S-Log3 or SLog3(Live HDR), the signal level of the scale is displayed in Limited Range (-7% to 109%). Set the upper and lower limits of the signal level for the pallets with reference to "Signal levels of the pallets" (page 45). Copies the data of other color palette presets to the selected color palette preset. Signal levels of the pallets Limited Range signal level [%] Full Range signal level [%] Input signal Code Value (10 bit) S-Log3 brightness [cd/m2] -6.8 0.4 4 - 0.0 6.3 64 - 3.5 9.3 95 0 10.0 14.9 152 0.9 20.0 23.4 239 3.2 30.0 32.0 327 8.2 40.0 40.5 414 19 50.0 49.1 502 42 60.0 57.7 590 93 70.0 66.2 677 202 80.0 74.8 765 439 90.0 83.3 852 946 100.0 91.9 940 2055 109.0 99.6 1019 4121 S-Log3(Live HDR) brightness [cd/m2] 0 0.4 1.6 5.0 14 40 90 230 580 1350 3000 6000 45