Sony BVM-HX3110 Operating Instructions - Page 107
NMOS Tab, Trap Settings, Test Trap, MIB data, Apply] button
View all Sony BVM-HX3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Trap Settings Configure the settings on the Trap notification to SNMP Manager. Click the [Apply] button to apply the settings. Item Trap Settings Name Network Interface Destination IP Address Destination Port Version Description Select whether to enable or disable the SNMP trap function. (Default value: Disable) Set the SNMP community name. Displays the corresponding network interface of this unit. (display only) Set the address to which the trap is sent. (Default value: 0.0.0.0) Set the port number of the trap destination. (Default value: 162) Set the SNMP version. (Default value: V2C) Setting Enable Disable Up to 64 ASCII code characters 1st: LAN1 2nd: LAN2 0.0.0.0 - 223.255.255.255 0 - 65535 V1 V2C Test Trap Click the [Send] button to immediately issue a test trap for the system validation according to [Trap Settings]. MIB data Click the [Retrieve] button to display a list of MIB information in a separate tab of your Web browser. NMOS Tab Configure the settings on NMOS. [Apply] button Applies the NMOS settings immediately. 107