Sony BVM-HX3110 Operating Instructions - Page 62
Remote menu, Monitor Network, Controller Network, IP Network
View all Sony BVM-HX3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Remote menu You can configure the settings for connecting to an external device that controls the monitor remotely. Monitor Network Controller Network Submenu Connection Network Setting Monitor ID Group ID IP Address Subnet Mask Default Gateway Cancel Confirm Setting Set the connection to an external device. (Default value: LAN) Off: Set to Off when this unit is not controlled remotely. Peer to Peer: for one to one connection LAN: for connection via a network Sets the ID of this unit. (Default value: 1) 1 - 99 Sets the group ID of this unit. (Default value: 1) 1 - 99 Sets the IP address. (Default value: 192.168.000.001) 000.000.000.000 - 255.255.255.255 Sets the subnet mask. (Default value: 255.255.255.000) 000.000.000.000 - 255.255.255.255 Sets the default gateway On or Off. (Default value: Off) Address: Sets the default gateway. (Default value: 000.000.000.000) 000.000.000.000 - 255.255.255.255 Selects to cancel the setting. Selects to save the setting. Note "Controller Network" is available when the menu is displayed via the controller. (Only when the controller is connected with the Peer to Peer connection or Single connection.) Submenu Network Setting IP Address Subnet Mask Default Gateway Cancel Confirm Setting Sets the IP address. 000.000.000.000 - 255.255.255.255 Sets the subnet mask. 000.000.000.000 - 255.255.255.255 Sets the default gateway On or Off. Address: Sets the default gateway. 000.000.000.000 255.255.255.255 Selects to cancel the setting. Selects to save the setting. IP Network Configure the IP network. See also "Network Tab" (page 98). 62