Sony BVM-HX3110 Operating Instructions - Page 65
multiple pins are pressed, the Ch. setting will, While the screen saver is on, the Marker, Tally
View all Sony BVM-HX3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Submenu Setting 1Pin, 2Pin, 3Pin, 4Pin, 6Pin, 7Pin, 8Pin The functions can be assigned to each pin on the PARALLEL REMOTE connector. The following functions can be assigned to each pin. Mono, Blue Only, Native Scan, Audio Muting, R Off, G Off, B Off, Chroma Up, Internal Signal, Character Off, Interlace, Gamut Marker, Ch.1 to Ch.30, Marker, Aspect Marker, Area Marker1, Area Marker2, Center Marker, Aspect Marker-Line, Asp. Blank.-Half, Asp. Blank.-Black, Time Code, Relative Cont. 1/2, Relative Cont. 1/3, Relative Cont. 1/ 4, Relative Cont. 1/8, Quad View, WFM, Vector Scope, CGS, Audio Level Meter, Pixel Zoom, Peak Lumi. 2x/LP, Peak Lumi. 2x, Peak Lumi. 4x, Under Scan, Side by Side, Conversion, False Color1, False Color2, False Color Scale, Camera Focus, Closed Caption, IMD, Tally Green, Tally Red, Grid Display, Fast Resp. Med1), Fast Resp. High1) For details on the function assignment (default) for each pin, see page 14. 1) Fast Response can be set when the optional "BVML-F10" license (sold separately) is enabled. Notes While the screen saver is on, the Marker, Tally Green and Tally Red are not displayed. Each function is applied when the pin is pressed, and each function is canceled when the pin is released, but Ch. does not return to the original Ch. even when the pin is released. When the pin is pressed or released, the function settings set with the menu or function keys are changed. On the other hand, the function settings can be changed with the menu or function keys regardless of the pin status. The setting is changed at the timing when the pin is pressed or released. At startup, the pins already pressed are applied in order from the pin with the high number. When multiple Ch. are assigned to pins, and multiple pins are pressed, the Ch. setting will be the last Ch. pressed. When the pin pressed last is released, the Ch. setting with the lowest pin number is applied. When multiple Asp. Blank.-Half/-Black are assigned to pins and multiple pins are pressed, the setting of Asp. Blank pressed last will be applied. When the pin pressed last is released, the setting with the lowest pin number is applied. When the pins assigned Tally Green and Tally Red are pressed at the same time, a yellow Tally is displayed. 65