Sony BVM-HX3110 Operating Instructions - Page 71

Submenu Out. Image(Single) Fix. EMO Ch. Fix. LUT Assign Setting Select which input signal to output from the Enhanced Monitor Out (EMO) terminal. (Default value: Displayed)  Displayed: Outputs the input signal of the displayed screen.  Fixed: Outputs the input signal set to the channel that is selected separately from the input signal of the displayed screen. When "Fixed" is selected, "Quad View" (page 50) and "Side by Side" (page 51) cannot be set to On. Select the setting channel of the input signal when "Fixed" is selected. (Default value: Ch.1)  Ch.1 - Ch.30 When the User LUT data is applied to a setting channel, select the destination to apply it to. (Default value: EMO)  Displayed & EMO: When the settings channel of the displayed screen and the settings channel of EMO are the same, User LUT is applied to the displayed screen and EMO. Example where the settings channel of the displayed screen and the settings channel of EMO are the same: Displayed: Ch.1 4K SDI Input1 EMO: Ch.1 4K SDI Input1 When the setting channel of the displayed screen and the setting channel of the EMO are different, and the input signal setting of either channel is 4K SDI or HDMI (equivalent to 4K), User LUT is applied preferentially to EMO. Example where the settings channel of the displayed screen and the settings channel of EMO are different: Displayed: Ch.1 HDMI EMO: Ch.2 4K SDI Input1  Displayed: User LUT is applied only to the displayed screen.  EMO: User LUT is applied only to EMO. Note If the channel set for the displayed screen and the channel set for EMO are different and the input signal set for both channels is 2K SDI or HDMI (2K equivalent), "Fix. LUT Assign" cannot be selected. The User LUT setting for each set channel is applied to the displayed screen and EMO. Submenu Fix. EMO Conv. Setting When "Fixed" is selected, select whether to apply Conversion (HDR SDR conversion) to the EMO output. (Default value: Off)  On: Conversion is applied.  Off: Conversion is not applied. Notes  When the input signal of the setting channel of "Fix. EMO Ch." is HDMI, it cannot be output to Enhanced Monitor Out.  If the input terminal settings of the displayed screen and each setting channel of "Fix. EMO Ch." are overlapped, display and EMO output cannot be performed at the same time. For example, if the input terminal 1 of the same SDI is set to "Ch.1" and "Ch.2", display and EMO output cannot be performed at the same time. To simultaneously display and output the same input signal to EMO in different channel settings, input the video of input terminal 1 to another terminal, and set that input terminal to "Ch.2". If a combination of channels that cannot be simultaneously displayed or output to EMO is configured, EMO output will take precedence. In this case, the displayed screen will be black, and the message "Invalid EMO Combination" will be displayed.  Even if the input terminals are different, 4K SDI and 4K SDI, 4K SDI and 2K SDI cannot be simultaneously displayed or output to EMO. For example, even if "4K SDI Input1" is set to "Ch.1" and "4K SDI Input3" is set to "Ch.2", they cannot be simultaneously displayed or output to EMO. The EMO output is prioritized, and the displayed screen will be black. SDI of two systems can be simultaneously displayed or output to EMO only in the combination of 2K SDI and 2K SDI.  When the setting channel of "Fix. EMO Ch." is changed, if it becomes a combination of channels that cannot be simultaneously displayed and output to EMO, EMO output will take precedence. The channel of the displayed screen is internally changed to the same setting channel of the EMO output, and the screen display continues.  " Fix. EMO Conv." is available when the optional "BVML-H10" license (sold separately) is enabled. 71