Sony DSR 11 Operating Instructions - Page 13

Chapter 1 Overview Supplied Remote Commander 1 TC RESET button 2 SEARCH SELECT buttons 3 Buttons for playing at various speeds 4 PAUSE button 5 PLAY button 6 REW button TC RESET 7 On/standby switch DISPLAY DATA CODE SEARCH SELECT 8 DISPLAY button 9 DATA CODE button MENU SET 0 Buttons for menu operation x1/10 x1/3 x1 x2 FRAME PAUSE REC PLAY REW FF STOP qa REC buttons qs FF button qd STOP button 1 TC RESET button Press this button to reset the time code to 00:00:00:00 during recording or in the recording pause mode. Notes • When the command mode of a Sony device / remote commander is set to VTR 4; - if you press this button while pointing the Remote Commander toward a Sony device other than this unit, the HMS counter on that machine will be reset to zero. - if you press a counter reset button on a Sony remote commander while pointing it toward this unit during recording or in the recording pause mode, the time code will be reset to zero. • This button functions only when the unit or other Sony device is recording in the DVCAM format. 2 SEARCH SELECT buttons Press these buttons to search for scenes using the search function. For details on the search function, see "Searching using the search function" on page 29 (GB). 3 Buttons for playing at various speeds You can play back a tape at normal speed or at a speed other than normal with these buttons. For details, see "Playing at various speeds" on page 28 (GB). 4 PAUSE button 5 PLAY button 13 Chapter 1 Overview (GB)