Sony DSR 11 Operating Instructions - Page 24
Playback, Playback Procedure - user manual
View all Sony DSR 11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Chapter 2 Playback and Recording Playback Playback Procedure This section describes the procedures used to play back a tape and send signals to another VCR. For details on the procedures required when using a computer as a recorder, refer to the instruction manual of your computer or the user's manuals of the software installed in it. 1 After checking the tape for slack and confirming that the q indicator is off, hold the cassette so that the tape window is facing upward, then insert it into this unit. For details on checking the tape for slack, see "Notes on Video Cassettes" on page 15 (GB). Note Do not insert the cassette forcibly. The unit may be damaged. The cassette is automatically loaded into the unit. 2 Press the PLAY button. This unit starts playback. To stop playback Press the STOP button on the unit. To pause playback Press the PAUSE button on the unit. Notes • When this unit is playing back a part of the tape where the recording format has been changed between the DVCAM format and the DV format, the picture and sound may be distorted. • This unit cannot play back a tape recorded in the LP mode of the consumer DV format. 24 (GB) Chapter 2 Playback and Recording