Sony DSR 11 Operating Instructions - Page 41

3 Chapter Adjusting and Setting Through Menus Chapter 3 Adjusting and Setting Through Menus Operating the Menus The unit allows you to set various parameters in the menus. Before you start using the unit, set the internal clock in CLOCK SET on the OTHERS menu. Except for clock setting, you can use all other factory-set default parameters but change them as needed. Note If the internal backup battery is exhausted, the menu settings will be initialized. The internal backup battery is fully charged if you connect the power to the unit for about 10 hours. The menu settings will be kept for about one month. Displaying the menu Press the MENU button on the Remote Commander. The menu is superimposed on the analog video output. Icons VTR SET VTR REC MODE A FF / REW SPD DISP ST I LL T I ME CM FROM ST I LL ETC FROM REC P DV EE OUT ST I LL P I CT [MENU] : END Submenus Changing the menu settings 1 Pressing the M/m buttons on the Remote Commander, select the menu icon you want to change, then press the SET button on the Remote Commander. 2 Pressing the M/m buttons, select the submenu you want to change, then press the SET button. 3 Pressing the M/m buttons, change the setting. 4 Press the SET button to return to the submenu. 5 Repeat steps 2 to 4, as needed. To return to step 1 Pressing the M/m buttons, select RETURN, then press the SET button. To exit from the menu Press the MENU button again. 41 Chapter 3 Adjusting and Setting Through Menus (GB)