Sony DSR 11 Operating Instructions - Page 22
To video equipment without a DV jack - remote control
View all Sony DSR 11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Chapter 2 Playback and Recording Playback To video equipment without a DV jack Recorder Other VCR Monitor Player DSR-11 to the audio input jacks to the video input jack to the S-video input connector to the LANC jack Audio cable (not supplied) Video cable (not supplied) S-video cable (not supplied) LANC cable (not supplied) l: Signal flow Connect either an S-video cable or a video cable as the cable for video signals. Notes • When you connect the output jacks of the recorder to the input jacks of this unit, select the input correctly with an input select switch on the recorder to prevent a humming noise or distortion of the picture. • Distorted signals (e.g., when played back at a speed other than normal) will not be recorded properly. Notes for a LANC connection • The LANC connection transmits signals such as control signals, time code, time counter data, and status data. • Jacks labeled CONTROL L have the same function as LANC jacks. Jacks labeled REMOTE may also have the same function. • Set the LANC switch on the recorder to M. A device which does not have M / S switch cannot be used to control this unit. 22 (GB) Chapter 2 Playback and Recording