Sony DVP-CX995V Operating Instructions - Page 25
Connecting to the 5.1ch input jacks, Connecting to a digital jack, the internal Dolby Digital, DTS - hdmi setup
UPC - 027242668591
View all Sony DVP-CX995V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Hookups D-1 : Connecting to the 5.1ch input jacks You can enjoy 5.1ch surround sound using the internal Dolby Digital, DTS, or Super Audio CD Multi decoder of this player. D-2 or D-3 : Connecting to a digital jack This connection will allow you to use the Dolby Digital, or DTS decoder function of your AV amplifier (receiver). z Hints • For correct speaker placement, refer to the instructions of the connected components. • To enhance the sound performance: -Use high-performance speakers. -Use front, rear, and center speakers of the same size and performance. -Place the subwoofer between the left and right front speakers. Notes For connection D-2 or D-3 • After you have completed the connection, be sure to set "DOLBY DIGITAL" to "DOLBY DIGITAL" and "DTS" to "DTS" in Quick Setup (page 26). • When you connect an amplifier (receiver) that conforms to the 96 kHz sampling frequency, set "48kHz/96kHz PCM" in "AUDIO SETUP" to "96kHz/24bit" (page 81). • Super Audio CD audio signals are not output from the DIGITAL OUT (COAXIAL or OPTICAL)/ HDMI OUT jack. • When you connect the player to an AV amplifier (receiver) using an HDMI cord, you will need to do one of the following: -Connect the AV amplifier (receiver) to the TV with the HDMI cord. -Connect the player to the TV with a video cord other than HDMI cord (component video cord, S VIDEO cord, or audio/video cord). 25