Sony DVP-CX995V Operating Instructions - Page 85
Adjusting the speaker volume, and level, Select TEST TONE and set to ON.
UPC - 027242668591
View all Sony DVP-CX995V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Adjusting the speaker volume and level 1 Select "SPEAKER SETUP" in the Setup Display. 2 Select "TEST TONE" and set to "ON." You will hear the test tone from each speaker in sequence. 3 From your listening position, select "LEVEL (FRONT)" or "LEVEL (REAR)" and adjust the value using X/x. 4 Select "TEST TONE" and set to "OFF" to turn off the test tone. Note The test tone signals are not output from the DIGITAL OUT (COAXIAL or OPTICAL)/ HDMI OUT jack. 85 Settings and Adjustments
85
Settings and Adjustments
Adjusting the speaker volume
and level
1
Select “SPEAKER SETUP” in the Setup
Display.
2
Select “TEST TONE” and set to “ON.”
You will hear the test tone from each
speaker in sequence.
3
From your listening position, select
“LEVEL (FRONT)” or “LEVEL (REAR)”
and adjust the value using
X
/
x
.
4
Select “TEST TONE” and set to “OFF”
to turn off the test tone.
Note
The test tone signals are not output from the
DIGITAL OUT (COAXIAL or OPTICAL)/ HDMI
OUT jack.