Sony DVP-CX995V Operating Instructions - Page 84

DISTANCE, LEVEL FRONT, LEVEL REAR, To adjust the volume of all the speakers at, one time, TEST TONE

Get Sony DVP-CX995V - DVD Changer PDF manuals and user guides
UPC - 027242668591
View all Sony DVP-CX995V manuals
Add to My Manuals
Save this manual to your list of manuals

Page 84 highlights

◆ DISTANCE Sets the distance from your listening position to the speakers. Set the distance to your front speakers in "FRONT" first (A). Then adjust the values in "CENTER" (center speaker B), and "REAR" (rear speaker C) to reflect the actual distance to your center speaker, and rear speakers. B A (1~30 ft) A (1~30 ft) C C Be sure to change the value in the Setup Display each time you move the speakers. Start from the front speaker. The default adjustments are in parentheses. FRONT (10 ft) Set this between 1 and 30 feet in 1 foot increments. CENTER (10 ft) Set this within -5 feet of the "FRONT" setting in 1 foot increments. For example, if "FRONT" is set to 20 feet, "CENTER" can be set between 15 and 20 feet. REAR (10 ft) Set this within -15 feet of the "FRONT" setting in 1 foot increments. For example, if "FRONT" is set to 20 feet, "REAR" can be set between 5 and 20 feet. ◆ LEVEL (FRONT) Varies the level of the front speakers. Be sure to set "TEST TONE" to "ON" for easy adjustment. The default adjustments are in parentheses. L (0 dB) R (0 dB) Set this between -6 dB and 0 dB in 0.5 dB increments. Set this between -6 dB and 0 dB in 0.5 dB increments. CENTER (0 dB) Set this between -12 dB and 0 dB in 0.5 dB increments. SUBWOOFER Set this between -10 dB and (0 dB) 0 dB in 0.5 dB increments. ◆ LEVEL (REAR) Varies the level of the rear speakers. Be sure to set "TEST TONE" to "ON" for easy adjustment. The default adjustments are in parentheses. L (0 dB) Set this between -12 dB and 0 dB in 0.5 dB increments. R (0 dB) Set this between -12 dB and 0 dB in 0.5 dB increments. To adjust the volume of all the speakers at one time Use the amplifier's (receiver's) volume control. ◆ TEST TONE The speakers will emit a test tone. Use this when you use the 5.1CH OUTPUT jacks and adjust "LEVEL." OFF The test tone is not emitted from the speakers. ON The test tone is emitted from each speaker in sequence. Notes • If each of the front or rear speakers are not placed at an equal distance from your listening position, set the distance according to the closest speaker. • The minimum distance is 1 foot. 84

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
84
◆
DISTANCE
Sets the distance from your listening position
to the speakers.
Set the distance to your front speakers in
“FRONT” first (
A
). Then adjust the values in
“CENTER” (center speaker
B
), and
“REAR” (rear speaker
C
) to reflect the
actual distance to your center speaker, and
rear speakers.
Be sure to change the value in the Setup
Display each time you move the speakers.
Start from the front speaker. The default
adjustments are in parentheses.
Notes
•
If each of the front or rear speakers are not placed
at an equal distance from your listening position,
set the distance according to the closest speaker.
•
The minimum distance is 1 foot.
◆
LEVEL (FRONT)
Varies the level of the front speakers. Be sure
to set “TEST TONE” to “ON” for easy
adjustment.
The default adjustments are in parentheses.
◆
LEVEL (REAR)
Varies the level of the rear speakers. Be sure
to set “TEST TONE” to “ON” for easy
adjustment.
The default adjustments are in parentheses.
To adjust the volume of all the speakers at
one time
Use the amplifier’s (receiver’s) volume
control.
◆
TEST TONE
The speakers will emit a test tone. Use this
when you use the 5.1CH OUTPUT jacks and
adjust “LEVEL.”
FRONT
(10 ft)
Set this between 1 and 30
feet in 1 foot increments.
CENTER (10 ft)
Set this within –5 feet of the
“FRONT” setting in 1 foot
increments. For example, if
“FRONT” is set to 20 feet,
“CENTER” can be set
between 15 and 20 feet.
REAR (10 ft)
Set this within –15 feet of
the “FRONT” setting in 1
foot increments. For
example, if “FRONT” is set
to 20 feet, “REAR” can be
set between 5 and 20 feet.
B
A
A
C
C
(1~30 ft)
(1~30 ft)
L (0 dB)
Set this between –6 dB and 0
dB in 0.5 dB increments.
R (0 dB)
Set this between –6 dB and 0
dB in 0.5 dB increments.
CENTER
(0 dB)
Set this between –12 dB and
0 dB in 0.5 dB increments.
SUBWOOFER
(0 dB)
Set this between –10 dB and
0 dB in 0.5 dB increments.
L (0 dB)
Set this between –12 dB and
0 dB in 0.5 dB increments.
R (0 dB)
Set this between –12 dB and
0 dB in 0.5 dB increments.
OFF
The test tone is not emitted
from the speakers.
ON
The test tone is emitted from
each speaker in sequence.