TP-Link TD-W8970 TD-W8970 V1 User Guide - Page 36
PPP Username/Password/Confirm Password, Authentication Type - default gateway
View all TP-Link TD-W8970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
TD-W8970 300Mbps Wireless N Gigabit ADSL2+ Modem Router User Guide Figure 4-7 ¾ PPP Username/Password/Confirm Password: Enter the User Name, Password and Confirm Password provided by your ISP. These fields are case-sensitive. ¾ Connection Mode: For PPPoE connection, you can select Always on or Connect on demand or Connect manually. Connect on demand is dependent on the traffic. If there is no traffic (or Idle) for a pre-specified period of time, the connection will tear down automatically. And once there is traffic send or receive, the connection will be automatically on. ¾ Authentication Type: Select the Authentication Type from the drop-down list, the default method is AUTO_AUTH, and you can leave it as a default setting. ¾ Enable IPv4: Check this box to enable IPv4. ¾ Enable IPv6: Check this box to enable IPv6. ¾ Default Gateway: Select a WAN connection from the drop-down list as the IPv4 default gateway. 27