TP-Link TD-W8970 TD-W8970 V1 User Guide - Page 49
TD-W8970, Add New Connection, IPSec Connection Name, Remote IPSec Gateway Address URL, Device1, - ipsec vpn
View all TP-Link TD-W8970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
TD-W8970 300Mbps Wireless N Gigabit ADSL2+ Modem Router User Guide ) Note: You could also use other VPN Routers to set VPN tunnels with TD-W8970. TD-W8970 supports up to 10 VPN tunnels simultaneously. Click Add New Connection in Figure 4-25 and then you will enter the screen shown in Figure 4-26. Figure 4-26 ¾ IPSec Connection Name: Enter a name for your VPN. ¾ Remote IPSec Gateway Address (URL): Enter the destination gateway IP address in the box which is the public WAN IP or Domain Name of the remote VPN server endpoint. (For example: Input 219.134.112.247 in Device1, Input 219.134.112.246 in Device 2) ¾ Tunnel access from local IP addresses: Choose Subnet if you want the Whole LAN to join the VPN network, or else choose Single Address if you want single IP to join the VPN network. 40