Uniden BCT15 English Owners Manual - Page 46
SCAN/SEARCH] Key, HOLD/RESUME] Key, MENU] Key, BNC Antenna Connector, External Speaker Jack
View all Uniden BCT15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
10. [EYES] Key • Press to select (enter) data value or a menu selection. • Press to edit channel data in Scan or Scan Hold modes. Note: does not apply to BearTracker system. • Press to capture and store a frequency in Search, Search Hold, Close Call, Close Call Hold, WX Scan, and WX Scan Hold modes. • Press to switch to the Edit Menu for a current Tone-Out. • Press to switch to Review Location mode for GPS operations. 11. [SCAN/SEARCH] Key • Press to resume scanning while monitoring a channel in Scan Hold mode. • Press to switch to Scan mode from any mode except Scan Hold, or GPS mode. • Press to enable a scan screen from GPS mode. 12. [HOLD/RESUME] Key • Press to enable a Hold while in the following modes: Scan, Search, Close Call Only, and WX Scan. • Press again to toggle to scan mode from a hold. Note that an error tone sounds in Close Call Only mode if a signal has not yet been acquired. 13. [MENU] Key Press then use the Scroll Control to step to various menu listings for option settings. 14. BNC Antenna Connector Connect an appropriate outdoor antenna or push on the supplied indoor antenna. 15. External Speaker Jack Use an mini (1/8-inch 3.5mm) audio plug to connect an external amplified speaker for enhanced listening in noisy environments. 16. 9-Pin Serial Connector for GPS or PC connection Using the cable from the GPS, connect a compatible unit here. Using a standard serial cable and possibly a gender changer or null modem adapter, connect a PC serial port here. 46