Uniden BCT15 English Owners Manual - Page 72
Start of Transfer, During Transfer, Clone Slave Press SCAN Key, Clone Slave Connecting, Complete
View all Uniden BCT15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
3b. (Slave scanner) Clone Slave Press SCAN Key [SCAN/SEARCH] Clone Slave Connecting 4. When you are ready to clone the scanner, press [SCAN/SEARCH] on the slave scanner first, then [SCAN/SEARCH] on the master scanner. The master scanner checks the connection between the two scanners, then transfers its data to the slave scanner. 5. When the transfer is complete, Complete appears on both scanners. If the transfer did not work, Error appears on the master scanner. Readjust the baud rate to a lower setting and try again. Start of Transfer During Transfer Press [L/O] on the Master unit to exit Clone mode. 72
72
3b.
(Slave scanner)
Clone Slave Press SCAN Key
J
[SCAN/SEARCH]
J
Clone Slave Connecting
4.
When you are ready to clone the scanner, press
[SCAN/SEARCH]
on the
slave scanner
first
, then
[SCAN/SEARCH]
on the master scanner. The
master scanner checks the connection between the two scanners, then
transfers its data to the slave scanner.
5.
When the transfer is complete,
Complete
appears on both scanners. If the
transfer did not work,
Error
appears on the master scanner. Readjust the
baud rate to a lower setting and try again.
Start of Transfer
During Transfer
Press
[L/O]
on the Master unit to exit Clone mode.