Uniden BCT15 English Owners Manual - Page 68
Set Delay Time, Set Attenuator, Set Alert Level, Set Bear Tracker, Out of Range, Set Max? Y/N
View all Uniden BCT15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
[MENU] Set Bear Tracker F Set Hold Time F Set the hold time, in seconds, between 0 and 255. Use to change the number position. If you exceed 255, and press F, you see Out of Range, Set Max? (Y/N) If you want to use the maximum setting, press F. If not, press [.No] to cancel and enter a new number in range. Set Delay Time This setting determines how long the scanner remains on channels of a system after the transmission ends before resumes scanning. [MENU] Set Bear Tracker F Set Delay Time F Set the delay time, in seconds, between 1 and 5 and Off. Then press F to make your selection. Set Attenuator This setting lets you introduce about 20dB attenuation to a strong signal. [MENU] Set Bear Tracker F Set Attenuator F to select either On or Off then F to set your selection. Set Alert Level This setting lets you choose a volume level for the selected Alert Tone. [MENU] Set Bear Tracker F Set Alert Level F to select a level between 1 and 15 (loudest) or Auto which matches the volume of your master volume control. 68