Uniden BCT15 English Owners Manual - Page 91
Setting Control-Channel Only Mode, Setting Site Location Information
View all Uniden BCT15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Setting Control-Channel Only Mode M [MENU] Program System F Select a trunked system F Edit Site (current) F Select a site F Set C-Ch Only F This setting determines the frequencies you need to enter for Motorola systems. Select your setting, then press F. On - You only need to enter control channel frequencies. Off - You must enter all voice and control channel frequencies. Note: The scanner defaults to On. Setting Site Location Information [MENU] Program System F Select a trunked system F Edit Site (current) F Select a site F Set LocationInfo F MESL This setting control whether the system is automatically enabled and disabled when you connect a GPS to the scanner. Set Latitude - Enter the system's latitude using the format you selected in the system settings. Set Longitude - Enter the system's longitude using the format you selected in the system settings. Set Range - Set the system's range using the units you selected in the system settings. Set GPS Enable - Depending on the data received from the GPS, the L/O status of the site is automatically controlled. Assigning a Trunked System to A State In addition to the BearTracker System Preprogrammed State information, you may want to program another system in that same state. Then, when you turn on that state using the [STATE] control and the Scroll Control, the system you program will also be unlocked and scanned. Programming Your Scanner 91