Xerox 3300MFP Service Manual - Page 101
Paper rolled in the OPC, Defective ADF, Check and Cause, Solution
UPC - 095205744415
View all Xerox 3300MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Paper rolled in the OPC General Troubleshooting Paper is rolled up in the OPC. Check and Cause 1. Paper is too thin. 2. The face of paper is curled. Defective ADF Solution 1. Recommend to use normal paper thickness. 2. How to remove the rolled paper in the OPC. ■ Remove the paper while turning the OPC against the ongoing direction. ■ Clean fingerprints on the OPC gently with soft cloth dampened with water, or tissue. ADF (Automatic document Feeder) does not operate properly. Check and Cause Solution 1. Check if ADF rubber and HOLDER rubber are damaged. 1. Replace the contaminated or damaged part. 2. Check if the document sensors of ADF 2. If you cannot confirm the damaged Assembly (3 paper sensors) are normal. part with the naked eye, try replacing the ADF Assembly. Phaser 3300MFP Service Manual 4-9