Xerox 3300MFP Service Manual - Page 83

JAM 1 Error Messages and Codes Check and Cause Solution 3. If continuous clusters occur, check 3. Replace the Housing-Pickup and/or whether the assembly slot between shaft- Shaft-Pickup. pickup and housing-pickup become open or is broken away. 4. If the paper feeds into the printer and Jam 0 occurs, check feed-sensor of the Control Board. Description 1. Paper is jammed in front of or inside the fuser. 2. Paper is stuck in the discharge roller and in the fuser just after passing through the Actuator-Feed. Fuser LSU CR OPC DR Toner Cartridge SR PTL Exit Sensor Pressure Roller Transfer Roller MP Sensor Feed Sensor Empty Sensor Feed Roller s3300mfp-068 Check and Cause Solution 1. If the paper is jammed in front of or inside the fuser. 1. Replace the HVPS. 2. If the paper is stuck in the discharge roller and the fuser just after passing through the Actuator-Feed, Feed Actuator may be defective. 2. Reassemble the Actuator-Feed and Spring-Actuator if the return is bad. Phaser 3300MFP Service Manual 3-3