Xerox 3300MFP Service Manual - Page 65
Scan Part, Control Panel Configuration, Micom controller - internal error
UPC - 095205744415
View all Xerox 3300MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Scan Part Theory of Operation Pictorial signal input part: output signal of CCD passes through Bypass Cap change to ADC at HT82V26, and defined signal between HT82V26 and CHORUSm processes the Image signal. When AFE accept each pixel, CDS (Correlated Double Sampling) technique which samples arm-level twice is used on each pixel by using CIP4e signal. 1. Pictorial image processing part: read CCD Pixel data in terms of 600 dpi Line and process Error Diffusion Algorithm on Text mode and Photo mode, and then store Data at Scan Buffer on PC Scan mode without algorithm. On every mode Shading Correction and Gamma Correction are executed ahead, then processing is executed later. * Scan Image Control Specification a) Minimum Scan Line Time: 0.7062 ms b) Scan Resolution: Max. 600 DPI c) Scan Width: 216 mm d) Main function ■ Internal 12 bit ADC ■ White Shading Correction ■ Gamma Correction ■ CCD Interface ■ 256 Gray Scale 2. CCD Operating Part: CCD Image sensor use +5V and Inverter uses +24V ■ CCD Maximum Operating Frequency: 10 MHz ■ CCD Line time: 0.7062 ms ■ White Data output Voltage: 0.7 V ± 0.5 V (Mono Copy, 0.75 ms/line) ■ Maximum Inverter Current: 600 mA Max. (+24 V) Control Panel Section Configuration The Control Panel uses Main Control and separated OPE Chip Micom and work as inner program, systemic operation is serial system which exchange Date with SIO Port of Main Control. The Control Panel consists of the Micom part, Matrix part, and LCD. Micom controller Micom has ROM, RAM, I/O Port built-in and displays and lights LCD by CPU command of main control part and report Key recognition Data to Control Board. Phaser 3300MFP Service Manual 2-23