Xerox 6128MFP User Guide - Page 118
System Setup, System Setup menu is used to make the printer operation settings, such as for alarm
UPC - 095205751772
View all Xerox 6128MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Description of Menu Items Item Fwd. Set Print Fwd. Error Print Prefix Dial Prefix Dial Num Discard Size ECM (Error Correction Mode) Extel Hook Thresh Modem Speed Country Description Specifies if the outgoing faxes should be printed when they are forwarded. When set to On, all of the forwarded faxes are printed. Prints a report if a forwarded fax is not successfully sent. Specifies whether or not to add the prefix number when you send a fax. Specifies the prefix dial number, up to five digits. This number dials before any auto dial number is started. It is useful for accessing the PABX exchange. Specifies if the printer should discard any excess data at the bottom of the page. If ECM is set to On (the default), it attempts to correct errors in the fax transmission, caused by problems, such as a noisy telephone line. Specifies the threshold value for the external telephone. Specifies the fax modem speed. Specifies the country where the printer is used. System Setup System Setup menu is used to make the printer operation settings, such as for alarm and power saver mode. Item Description Power Saver Timer Specifies the transitional time of Power Saver Modes 1 and 2 in increments of 1 minute. • Mode 1 (Printer) 1 min. to 60 min. (default is 30 minutes) • Mode 2 (System) 5 min. to 120 min. (default is 30 minutes) For details, refer to Power Saver Mode on page 22. Auto Reset Specifies the time the printer waits for further control panel input before automatically resetting the settings for COPY, SCAN, or FAX and returning to the standby mode. Fault Time-Out You can cancel a printing process when it goes beyond a set time period. Set the time until the print job is canceled. When this timeout expires, the print job is canceled. • 5 sec. to 300 sec. (default: 30 sec.) Specifies the amount of time in increments of 1 second the printer waits for additional data before it cancels the job. • Off Cannot cancel. Phaser® 6128MFP Multifunction Printer 118