Xerox 6128MFP User Guide - Page 48

Loading Paper Loading Paper This section includes: • Loading Paper in the Paper Tray on page 48 • Loading Paper in the Manual Feed Slot on page 50 Loading Paper in the Paper Tray Use the paper tray for a wide range of media including: • Plain paper • Card stock • Labels • Glossy paper • Specialty media including business cards, postcards, trifold brochures, and weatherproof paper • Pre-printed paper (paper already printed on one side) • Custom size paper See also: About Paper on page 45 In addition to plain paper, the paper tray can use various other sizes and types of print media, such as envelopes. Make sure of the following points when loading paper in the paper tray: You can load up to 250 sheets or a stack of paper (65-220 g/m2, 17-40 lb. Bond, 40-80 lb. cover) less than 15 mm high. Sizes can start from 3 x 5 in. • Paper tray accepts print media within the following dimensions: • Width: 76.2-216.0 mm (3-8.5 in.) • Length: 127.0-355.6 mm (5-14 in.) Make sure of the following points to avoid any troubles during printing: • Do not load different types of paper at the same time. • Use high quality paper for laser printers to print at high quality. See About Paper on page 45. • Do not remove or add paper to the tray when printing, or if there is any paper still in the tray. Doing so may cause a paper jam. • Do not put any objects other than paper on the tray. Also, do not push or force down the paper tray. • Always load paper short-edge feed. Phaser® 6128MFP Multifunction Printer 48