Xerox 6128MFP User Guide - Page 128

Print-Quality Problems Symptom Toner smears when rubbed Reason/Action The paper is damp. Replace the paper. See About Paper on page 45. The paper is outside the recommended specification range. Replace the paper with a recommend size and type, and confirm that your print driver settings are correct. See About Paper on page 45. The toner cartridges are not Xerox toner cartridges. Verify that the toner cartridges (C/M/Y/K) meet specifications, and replace if necessary. The fuser is old or damaged. Replace the fuser. Blank pages Two or more sheets may be feeding at once. Remove the paper stack from the tray, fan it, and reinsert it. The toner cartridges are not Xerox toner cartridges. Verify that the toner cartridges (C/M/Y/K) meet specifications, and replace if necessary. The transfer unit is old or damaged. Replace the transfer unit. The high-voltage supply is defective. See the Xerox Support website, www.xerox.com/office/6128MFPsupport, for assistance. Hair-like marks appear in or around black half-tone printing Shadows appear around areas of dense black printing The paper was left unwrapped for a long time (especially in a dry environment). Replace the paper. See About Paper on page 45. The paper is outside the recommended specification range. Replace the paper with a recommended size and type, and confirm that your print driver settings are correct. See About Paper on page 45. The transfer unit is old or damaged. Replace the transfer unit. Color around the edge of The color registration is incorrect. printing is incorrect Adjust the color registration. See Color Registration on page 133. Phaser® 6128MFP Multifunction Printer 128