Yamaha AW4416 Version2.0 Manual Supplement

Yamaha AW4416 Manual

Get Yamaha AW4416 PDF manuals and user guides View all Yamaha AW4416 manuals
Add to My Manuals
Save this manual to your list of manuals

Yamaha AW4416 manual content summary:

  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 1
    Version 2.0 Manual Supplement E
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 2
    11 Transmitting internal AW4416 settings via MIDI (Bulk Dump 11 Newly added MIDI Remote function.......... 13 Additional functionality for Automix .......... 19 Mini YGDAI plug-in system compatible I/O card operations 21 Backing up an I/O card 21 Restoring to an I/O card 22 Reference QUICK REC
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 3
    the patch-source. A MIX.CH (Input channel) This area shows the type of input signal that is assigned to each input channel 1-16. The symbols (jacks) displayed at the right of this area indicate the direct output of each input channel. B REC.TR (Recorder track) This area shows tracks 1-16 (Tr1-Tr16
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 4
    patch and recorder input settings will be set according to the settings of the Quick Rec 2 page. • Assignments to the stereo bus will be forcibly cancelled for any input channel to which a patch cable is connected. • Channel library number 01 will be recalled for the monitor channel of any track to
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 5
    in this case, the assign a function. Tip! When the AW4416 is in its initial state, all shortcut keys are set to No Assign. 4 Move the cursor to the function list, and use the [DATA/JOG] dial to select the function that you want to assign. For a list of the functions that can be selected, refer
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 6
    receiving a control change will cause the AW4416 parameter assigned to that control change in the CTL Asgn. page to change. q OMNI If this button is on, control changes of all MIDI channels will be received regardless of the Rx CH (Receive MIDI channel) setting (8). 6 Version 2.0 Manual Supplement
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 7
    variation in MTC (such as a tape recorder or computer-based sequencer) is used as the MTC master. The SYNC AVERAGE setting is valid only when the word clock source is set to "INT" (internal clock). If the AW4416 is synchronized to an external clock, operation will automatically be the same as when
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 8
    according to the type of computer you are using. Move the cursor to the TO HOST connector graphic, and turn the [DATA/JOG] dial to select the transmission speed from the following. Setting Platform PC1 NEC PC-9800/9821 series*1 PC2 MAC IBM PC compatible, NEC PC-9800/9821 series*1 Apple
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 9
    Using control changes to operate AW4416 parameters In version 2.0, AW4416 parameters can be assigned to control changes, so that AW4416 operations can be recorded/played back on a MIDI sequencer or other external MIDI device. s Assigning a parameter to a control change 1 Press the [MIDI] key ¡ [
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 10
    can use control changes to record/ play back AW4416 parameter operations on a MIDI sequencer. 1 Connect the AW4416 and your MIDI sequencer as shown in the following diagram, and make settings so that both devices will operate in synchronization. MTC master PROFESSIONAL AUDIO WORKSTATION AW4416 MTC
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 11
    parameters of the AW4416. Here's how to record/play back parameter changes on your MIDI sequencer. 1 Make settings on the AW4416 and on your MIDI sequencer so that they will operate in synchronization using MTC. For details on connections, refer to page 10. Tip! Make sure that "MIDI" is selected as
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 12
    request" message requesting the bulk dump data selected in 1 will be transmitted from the MIDI OUT connector/TO HOST connector/option slot. This button is used when two AW4416 units are connected by their respective MIDI IN/OUT connectors, and you want to copy scene memory or library data from one
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 13
    corresponding settings and/or libraries will be updated. [Reference pages] Details on the Bulk Dump page ¡ P.31 Value= 0 q Messages that can be assigned to [ON] keys MIDI messages whose value switches to 0 or 127 can be assigned to [ON] keys. For if you assign control change #64 (Hold) to an [ON
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 14
    Remote function with the default settings. Tip! For the MIDI messages that are assigned by default to the faders/[ON] keys by the MIDI Remote function, refer to page 35. 1 Connect the AW4416's MIDI OUT/THRU connector to the MIDI IN connector of the external device. At this time, make sure that the
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 15
    to the AW4416, and assign it to a desired fader. 1 Connect the MIDI OUT/THRU connector of the AW4416 to the MIDI IN connector of your synthesizer, and the MIDI IN connector of the AW4416 to the MIDI OUT connector of your synthesizer. PROFESSIONAL AUDIO WORKSTATION MIDI IN connector MIDI OUT
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 16
    no MIDI message will be transmitted when you operate the fader. Tip! • The edited content of the REMOTE screen is saved as part of the song. • If you want to return the settings of the displayed page to the factory condition, hold down the [SHIFT] key and press the [F5] key. 16 Version 2.0 Manual
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 17
    you want to assign a MIDI message. The display area will show the MIDI messages that are currently assigned to the fader and [ON] key of that channel. PROFESSIONAL AUDIO WORKSTATION MIDI IN connector MIDI OUT connector AW4416 MIDI OUT/THRU MIDI IN connector connector MIDI keyboard 2 Press the
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 18
    to a connected external device, the device may malfunction. Please use caution. Tip! The edited content of the REMOTE screen is saved as part of the song. [Reference pages] Details on the Remote A 1-8/Remote A 9-16/Remote B 1-8/Remote B 9-16 pages ¡ P.33 18 Version 2.0 Manual Supplement
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 19
    mode and play back the song from the beginning, the MIDI Remote operations you recorded will be reproduced. Tip! If necessary, you can switch REMOTE pages and use another mixing layer (REMOTE A or REMOTE B) to record additional MIDI Remote operations onto the automix. By using this method, you can
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 20
    . C CHANNEL This shows the mixing layer (Remote A/Remote B) for that event, and the channel (1-16) of the fader/[ON] key Reference pages] For details on off-line automix editing ¡ "Operation Guide" P.225 For details on the AUTOMIX page Event List page ¡ "Reference Guide" P.122 20 Version 2.0 Manual
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 21
    manufactured by WAVES Corporation. For details refer to the manual for your I/O card. For details on the types of I/O cards compatible with the Mini YGDAI plug-in system, please contact a Yamaha information center, distributor, or the following Internet URL. http://www.aw4416.com/ Tip! In the Plug
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 22
    an I/O card When an AW4416 scene is recalled (or when a song is loaded), the MEM.BANK 1 settings are automatically restored to the I/O card in option slot 1, and the MEM.BANK 2 settings to the I/O card in option slot 2. However if necessary, you can also perform the restore operation manually. This
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 23
    I/O card (slot 2) • DIN L/DIN R....... L/R channels of the DIGITAL STEREO IN jack • SMP 1-SMP 8...... Sampling pads 1-8 • MET Internal metronome E Patch cables This area shows virtual patch cables that connect the direct outputs of input channels 1-16 (MIX.CH column) to recorder inputs 1-16 (REC
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 24
    in the Quick Rec 2 page will take effect. At this time, the input channels/tracks to which patch cables are connected will change as follows. • The input patch and recorder input settings will change according to the settings of the Quick Rec 2 page. • Assignments to the stereo bus will be forcibly
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 25
    the CD-RW drive, and load the CD (*) CD UNLOAD Open the tray of the CD-RW drive (*) AUTOMIX [Enable/Disable] Turn automix on (Enable) or off (Disable) (*) MTC SYNC [Master/Slave] Switch the AW4416 between MTC master (Master) and MTC slave (Slave) (*) REMOTE LAYER TC DISPLAY Switch the mixing
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 26
    In this case the other assigned to the [F1]-[F5] keys will appear at the bottom of the display. • If the CD-RW drive is not selected in a screen such as CD PLAY or MASTERING, the "CD LOAD" or "CD UNLOAD" function assigned to the [CTRL] key + function key will not be executed. 26 Version 2.0 Manual
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 27
    and right columns, select the desired values for that group. For the parameters that can be assigned, refer to the table on page 28. C INITIALIZE button This button resets the control change number assignments to the default state. For the default settings, refer to the table on page 30. Tip! In
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 28
    Parameter 1 Parameter 2 Parameter 3 NO ASSIGN No parameter assigned Content Parameter 1 FADER Parameter 2 CHANNEL MASTER AUX 1 SEND | AUX 8 SEND Parameter 3 INPUT 1-24 MONI 1-16 RETURN 1/2 ST OUT AUX 1-8 BUS 1-8 INPUT 1-24 MONI 1-16 RETURN 1/2 Content Operate the fader of the specified channel
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 29
    1 Parameter number 1-15 for internal effect 2 ... (1) Parameter number 1-15 for internal effect 2 ... (2) MIX BAL parameter of internal effect 2 Parameter 1 PAN Parameter 2 CHANNEL BALANCE Parameter 3 INPUT 1-24 MONI 1-16 RETURN1 L/R RETURN2 L/R ST OUT Content Control the channel pan (or balance
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 30
    FADER 23 FADER 22 FADER 21 FADER 20 FADER ∫ 1 FADER 0 NO ASSIGN PARAMETER AUX7 SEND INPUT 16 AUX7 SEND INPUT 1 BALANCE CHANNEL CHANNEL CHANNEL CHANNEL CHANNEL ST OUT RETURN 2R RETURN 2L RETURN 1R RETURN 1L INPUT 24 CHANNEL MASTER CHANNEL CHANNEL CHANNEL INPUT 1 ST OUT RETURN 2 RETURN 1 INPUT 20
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 31
    the contents of various AW4416 memories (scene memory, libraries, automix, etc.) and MIDIrelated settings as bulk data from the MIDI OUT/THRU connector (or TO HOST connector/option slot). 1 Key operation • [MIDI] key ¡ [F5] (Bulk Dump) key (*1) • Repeatedly press the [MIDI] key until 2 the
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 32
    is recorded. s Additional functions in the Bulk Dump page In the Bulk Dump page, holding down the [SHIFT] key will assign the following function to the [F1] key. AW4416 Bulk dump: reception on MIDI OUT MIDI IN Bulk dump data Request message MIDI IN MIDI OUT PROFESSIONAL AUDIO WORKSTATION
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 33
    turned on. • If you input a MIDI message manually, it is possible to input an inappropriate or invalid message. When assigning MIDI messages, we recommend that you use the LEARN button (4) whenever possible. (For details on using the LEARN button to assign a MIDI message, refer to page 15.) Version
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 34
    MIDI IN connector (or TO HOST connector/option slot) will be input to the MIDI message area (1). By using this function, a MIDI message received by the AW4416 can be assigned each layer. • Operations of the faders and [ON] keys used for the MIDI Remote function can also be recorded in automix. By
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 35
    CTL CHG8 Fader Message Control change #1 (MIDI ch=1) Control change #2 (MIDI ch=1) Control change #3 (MIDI ch=1) Control change #4 (MIDI ch=1) Control change #5 (MIDI ch=1) Control change #6 (MIDI ch=1) Control change #7 (MIDI ch=1) Control change #8 (MIDI ch=1) Version 2.0 Manual Supplement 35
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 36
    MIDI message received by the AW4416 will be assigned to the fader of the currently-displayed channel. This is the same function as the LEARN button (fader). • [F5] (BANK INITIALIZE) key All settings of the currently displayed page will be reset to the default values. (For the default settings, refer
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 37
    of scene memories or library data The bulk dump function can be used to send data to another device, or copy settings from another device to the AW4416. 1.10 MIDI Remote MIDI data created by the user can be transmitted from the AW4416 by operating its faders or ON keys. 2. AW4416 settings and
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 38
    internal effect Bn CONTROL CHANGE rx/tx Edit parameters (use the Control Change Assign Table) Cn PROGRAM CHANGE rx/tx Switch scene memories (use the Control Change Assign Table) 3.2 SYSTEM COMMON MESSAGE command rx/tx function F1 MIDI TIME CODE rx/tx MTC transmission (when MTC Master
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 39
    of the channel. This message is echoed if [Control Change ECHO] is ON. A scene memory will be recalled according to the [Program Change Assign Table] settings. < Transmission > If [Program Change TX] is ON, performing a Recall oper- ation on the AW4416 will cause this message to be trans- mitted
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 40
    enter Review mode. < Reception > If the AW4416 is operating as Record Exit EOX 11110111 F7 End Of Exclusive 4.13.1.8 MMC RESET < Transmission > This message is transmitted with a device number of 7F when song loading is finished. < Reception > This message is received if the AW4416 is operating
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 41
    .2.3 Setup Memory Bulk Dump Format STATUS 11110000 F0 System Exclusive Message ID No. 01000011 43 Manufacturer's ID No. (YAMAHA) SUB STATUS 0000nnnn 0n n=0-15(MIDI Channel No.1- 16) FORMAT No. 01111110 7E Universal Bulk Dump BYTE COUNT (HIGH) 00000100 04 522(512+10)bytes BYTE COUNT (LOW
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 42
    Remote Memory Bulk Dump Format STATUS 11110000 F0 System Exclusive Message ID No. 01000011 43 Manufacturer's ID No. (YAMAHA) SUB STATUS 0000nnnn 0n n=0-15(MIDI Channel No.1- 16) FORMAT No. 01111110 7E Universal Bulk Dump BYTE COUNT (HIGH) 00010100 14 2578(2568+10)bytes BYTE COUNT (LOW
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 43
    11 Effect Library Bulk Dump Format STATUS 11110000 F0 System Exclusive Message ID No. 01000011 43 Manufacturer's ID No. (YAMAHA) SUB STATUS 0000nnnn 0n n=0-15(MIDI Channel No.1- 16) FORMAT No. 01111110 7E Universal Bulk Dump BYTE COUNT (HIGH) 00000000 00 112(102+10)bytes BYTE COUNT (LOW
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 44
    11110111 F7 End Of Exclusive All data is 7 bit. 4.13.2.22 Control Change Assign Table Bulk Dump Request Format STATUS 11110000 F0 System Exclusive Message ID No. 01000011 43 Manufacturer's ID (YAMAHA) SUB STATUS 0010nnnn 2n n=0-15(MIDI Channel No.1- 16) 44 Version 2.0 Manual Supplement
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 45
    (YAMAHA) p=mode (1:parameter change or response for request 3:parameter request) n=0-15(Rx Channel No.1-16) MODEL ID(Digital Mixer) Device Code(AW4416) Parameter type data 0 data n End Of Exclusive Parameter type rx/tx function 0x00 rx/tx edit buffer (byte operation format) 0x01 rx/tx setup memory
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 46
    43 Manufacturer's ID No. (YAMAHA) SUB STATUS 0001nnnn 1n parameter change or response n=0-15(MIDI Channel No.1-16) GROUOP ID 00111110 3e MODEL ID(digital mixer) MODEL ID 00001000 08 Device code (AW4416) PARAM TYPE 00000001 01 byte operation for system memory (type) DATA 0aaaaaaa dd0
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 47
    n=0- 15(MIDI Channel No.1-16) GROUOP ID 00111110 3e MODEL ID(digital mixer) MODEL ID 00001000 08 Device code (AW4416) PARAM TYPE 01000011 43 controller DATA 00000000 00 control no.(0:key remote) 0ddddddd dd No. 0-17(key 1-18) 0000dddd dd data(bit0-2:change bit no.0-7, bit3:0=reset 1=set
  • Yamaha AW4416 | Version2.0 Manual Supplement - Page 48
    IP 48 Printed in Japan YAMAHA CORPORATION Pro Audio & Digital Musical Instrument Division P.O. Box 3, Hamamatsu, 430-8651, Japan
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Version 2.0 Manual Supplement
E