Yamaha AW4416 Version2.0 Manual Supplement - Page 6

AW4416 Version 2.0 Manual Supplement Added/modified MIDI functions MIDI-related functionality has been significantly enhanced in version 2.0. The following functions and specifications have been added or modified. q The various items in the previous MIDI Setup page and MIDI Sync page have been reorganized into the MIDI Setup 1 page and MIDI Setup 2 page. q You can now use control changes or parameter changes to operate the parameters of the AW4416 from an external MIDI device. q Internal AW4416 settings can now be output via MIDI. q A "MIDI Remote" function has been added, allowing you to use faders 1-16 and [ON] keys 1-16 to control external MIDI devices. q As an MTC output destination, you can now select MIDI/TO HOST/OPTION (option slot 2) in addition to the previous choice of the MTC OUT connector. q MTC is now transmitted from the MTC OUT connector at all times. q As the port used to transmit/receive MIDI messages, you can now select OPTION (option slot 2) in addition to the previous choices of MIDI/TO HOST. This setting will be valid when a I/O card able to transmit/receive MIDI messages (such as the mLAN card "MY8-mLAN" expected to go on sale soon) is installed in option slot 2. The additions and changes for each item are explained below. Changes in the MIDI Setup page/ MIDI Sync page The various items in the previous MIDI Setup page and MIDI Sync page have been reorganized into the MIDI Setup 1 page and MIDI Setup 2 page. The content of the new pages is as follows. s MIDI Setup 1 page Here you can select the MIDI transmit/receive channels, turn transmission and reception of various MIDI messages on/off, and make settings related to MIDI synchronization. 1 2 7 8 3 4 9 5 6 K J A PROGRAM CHANGE Here you can make settings for program change message transmission/reception. Each button has the following function. q TX If this button is on, the program change number assigned to a scene will be transmitted when that scene is recalled. q RX If this button is on, a scene will be recalled when the program change number assigned to that scene is received. q OMNI If this button is on, program changes of all MIDI channels will be received regardless of the Rx CH (Receive MIDI channel) setting (8). q ECHO If this button is on, received program changes will be "thru-ed" (retransmitted) without change from the MIDI OUT connector/TO HOST connector. B CONTROL CHANGE Here you can make settings for control change message transmission/reception. Each button has the following function. q TX If this button is on, operating a parameter of the AW4416 will cause the control change assigned to that parameter in the CTL Asgn. page to be transmitted. q RX If this button is on, receiving a control change will cause the AW4416 parameter assigned to that control change in the CTL Asgn. page to change. q OMNI If this button is on, control changes of all MIDI channels will be received regardless of the Rx CH (Receive MIDI channel) setting (8). 6 Version 2.0 Manual Supplement