Yamaha AW4416 Version2.0 Manual Supplement - Page 46

MIDI data format 4.13.3.5 Parameter Change (byte operation for type 0x01:setup memory) < Reception > This message is received if [Parameter Change RX] is ON and the [Rx CH] matches the MIDI channel included in the Sub Status. This message will be echoed if [Parameter Change ECHO] is ON. When this message is received, the specified parameter will be controlled. < Transmission > This message will be echoed if [Parameter Change ECHO] is ON. STATUS 11110000 F0 System Exclusive Message ID No. 01000011 43 Manufacturer's ID No. (YAMAHA) SUB STATUS 0001nnnn 1n parameter change or response n=0-15(MIDI Channel No.1-16) GROUOP ID 00111110 3e MODEL ID(digital mixer) MODEL ID 00001000 08 Device code (AW4416) PARAM TYPE 00000001 01 byte operation for system memory (type) DATA 0aaaaaaa dd0 address( H) high 7 bits of 14 bits address 0aaaaaaa dd1 address( L) low 7 bits of 14 bits address 0000dddd dd2 data( H) high 4 bits of 8 bits data 0000dddd dd3 data( L) low 4 bits of 8 bits data : : continuous address datas EOX 11110111 F7 End Of Exclusive The range of valid addresses is 0x0000 - 0x00ff. 4.13.3.6 Parameter Change (bit operation for type 0x41:setup memory) < Reception > This message is received if [Parameter Change RX] is ON and the [Rx CH] matches the MIDI channel included in the Sub Status. This message will be echoed if [Parameter Change ECHO] is ON. When this message is received, the specified parameter will be controlled. < Transmission > This message will be echoed if [Parameter Change ECHO] is ON. STATUS 11110000 F0 System Exclusive Message ID No. 01000011 43 Manufacturer's ID No. (YAMAHA) SUB STATUS 0001nnnn 1n parameter change or response n=0-15(MIDI Channel No.1-16) GROUOP ID 00111110 3e MODEL ID(digital mixer) MODEL ID 00001000 08 Device code (AW4416) PARAM TYPE 01000001 41 bit operation for system memory (type) DATA 0aaaaaaa dd0 address( H) high 7 bits of 14 bits address 0aaaaaaa dd1 address( L) low 7 bits of 14 bits address 0ddddddd dd2 data(bit0-2:change bit no.0-7, bit3:0=reset 1=set) : : EOX 11110111 F7 End Of Exclusive The range of valid addresses is 0x0000 - 0x00ff. 4.13.3.7 Parameter Value Request (type 0x00:edit buffer, 0x01:setup memory) < Reception > This message is received if [Parameter Change RX] is ON and the [Rx CH] matches the MIDI channel included in the Sub Status. This message will be echoed if [Parameter Change ECHO] is ON and this AW4416 unit did not receive the message. When this message is received, the value of the specified parameter will be transmitted as a Parameter Change Message. < Transmission > This message will be echoed if [Parameter Change ECHO] is ON and this AW4416 unit did not receive the message. STATUS 11110000 F0 System Exclusive Message ID No. 01000011 43 Manufacturer's ID No. (YAMAHA) SUB STATUS 0011nnnn 3n parameter request n=0- 15(MIDI Channel No.1-16) GROUOP ID 00111110 3e MODEL ID(digital mixer) MODEL ID 00001000 08 Device code (AW4416) PARAM TYPE 00tttttt tt 00:edit buffer, 01:system memory (type) DATA 0aaaaaaa dd0 address( H) high 7 bits of 14 bits address 0aaaaaaa dd1 address( L) low 7 bits of 14 bits address 0ddddddd dd count EOX 11110111 F7 End Of Exclusive The range of valid addresses is edit buffer 0x0000 0x0595 and setup memory 0x0000 - 0x00ff. 4.13.3.8 Parameter Change (type 0x02:function call) < Reception > This message is received if [Parameter Change RX] is ON and the [Rx CH] matches the MIDI channel included in the Sub Status. This message will be echoed if [Parameter Change ECHO] is ON. When this message is received, the corresponding memory or library will be recalled or stored. < Transmission > This message will be echoed if [Parameter Change ECHO] is ON. STATUS 11110000 F0 System Exclusive Message ID No. 01000011 43 Manufacturer's ID No. (YAMAHA) SUB STATUS 0001nnnn 1n parameter change n=0- 15(MIDI Channel No.1-16) GROUOP ID 00111110 3e MODEL ID(digital mixer) MODEL ID 00001000 08 Device code (AW4416) PARAM TYPE 00000010 02 function call DATA 0ddddddd dd0 function 0ddddddd dd1 number 0ddddddd dd2 channel EOX 11110111 F7 End Of Exclusive 46 Version 2.0 Manual Supplement