Yamaha AW4416 Version2.0 Manual Supplement - Page 22

AW4416 Version 2.0 Manual Supplement Restoring to an I/O card When an AW4416 scene is recalled (or when a song is loaded), the MEM.BANK 1 settings are automatically restored to the I/O card in option slot 1, and the MEM.BANK 2 settings to the I/O card in option slot 2. However if necessary, you can also perform the restore operation manually. This method allows the MEM.BANK 1 settings to be restored to the I/O card of option slot 2 (or vice versa). The procedure is as follows. 1 Press the [AUX7] ¡ [F5] key or the [AUX8] key ¡ [F5] key to access the Plug-In 1 page or Plug-In 2 page. Access the Plug-In 1 page if you want to restore to the I/O card installed in option slot 1, or access the Plug-In 2 page if you want to restore to the I/O card installed in option slot 2. At this time you must select a memory bank that contains data for an I/O card of the same type as the restore-destination. If the I/O card is of a different type, the Restore operation cannot be performed. 4 To execute the Restore operation, move the cursor to the OK button and press the [ENTER] key. The saved settings will be loaded into the I/O card. 2 Hold down the [SHIFT] key and press the [F2] (Restore) key. A popup window will appear, allowing you to restore the I/O card settings. 3 Move the cursor to either the MEM.BANK 1 or MEM.BANK 2 button, and press the [ENTER] key. Select either MEM.BANK 1 or MEM.BANK 2 to choose the restore-source memory bank (1 or 2). If the memory bank already contains data, the bank name will be displayed. If it does not contain data, the display will indicate "NO DATA!" 22 Version 2.0 Manual Supplement