Yamaha MOX8 Owner's Manual - Page 65

Appendix  Have any or all of the effect types been set to "thru" or "off"?  When this occurs in the Performance mode/Song mode/Pattern mode, check whether the Insertion Switch (INS SW) parameters are set properly or not. [PERFORM]  [F6] EFFECT  [SF2] INS SW [SONG]/[PATTERN]  [MIXING]  [F3] EFFECT  [SF2] INS SW The Edit Indicator appears, even when parameters are not being edited.  Keep in mind that even though the Edit mode is not active, simply moving a Knob/Slider or playing back the Song/Pattern changes the current Voice, Performance, or Mixing, causing the Edit Indicator to appear. Cannot start the Arpeggio.  Check whether the ARP [ON/OFF] button is turned on or off.  When a User Arpeggio type is selected, does the currently selected Arpeggio actually contain data?  Are the Arpeggio related parameters such as Note Limit and Velocity Limit set appropriately? [VOICE]  ARP [EDIT]  [F4] LIMIT [PERFORM]  ARP [EDIT]  [F4] LIMIT [SONG]/[PATTERN]  ARP [EDIT]  [F4] LIMIT  When this situation occurs in the Performance/Song/Pattern mode, check the Arpeggio Switch parameter. If this parameter for the current Part is set to off, Arpeggio playback will not be triggered by your keyboard performance even if the ARP [ON/OFF] button is turned on. [PERFORM]  ARP [EDIT]  [F3] MAIN  Part selection  "Switch" [SONG]/[PATTERN]  ARP [EDIT]  [F3] MAIN  Part selection  "Switch"  Is the MIDI Sync parameter set to "internal" or "auto" (using internal clock)? [UTILITY]  [F5] MIDI  [SF3] SYNC  "MIDI Sync" = "auto" or "internal" Cannot stop the Arpeggio.  When Arpeggio playback does not stop even if you release the key, set the Arpeggio Hold parameter to "off." [VOICE]  ARP [EDIT]  [F3] MAIN  "Hold" [PERFORM]  ARP [EDIT]  [F3] MAIN  Part selection  "Hold" [SONG]/[PATTERN]  ARP [EDIT]  [F3] MAIN  Part selection  "Hold" The Voice assigned to the Performance produces a different sound from the one in the Voice mode.  This is normal because the Voice sound is determined by the parameter settings in the Performance mode. To solve this problem, you will need to apply the same parameter settings as those used in the Voice mode via the following three steps. 1. Set the "P.WithVce" (Parameter With Voice) parameter to "on" for a certain Part then reselect the same Voice. The settings of some Voice Common parameters will be applied to the Performance Part. [PERFORM]  [EDIT]  Number [1] - [4]  [F1] VOICE  [SF1] VOICE  "P.WithVce" 2. Execute the Voice Copy Job in the Performance Job mode. This Job copies the System Effect, Master Effect and Master EQ settings in the Voice mode to the Performance Common parameters. [PERFORM]  [JOB]  [F3] COPY  [SF2] VOICE 3. Set the Reverb Send Level and Chorus Send Level to the desired value (same as in the Voice mode) manually. [PERFORM]  [EDIT]  Part selection  [F2] OUTPUT  [SF2] EF SEND The Song/Pattern cannot be started even when pressing the [F] (Play) button.  Does the selected Song or Pattern (phrase) actually contain data?  Is the [DAW REMOTE] button turned on?  Is the MIDI Sync parameter set to "internal" or "auto" (using internal clock)? [UTILITY]  [F5] MIDI  [SF3] SYNC  "MIDI Sync" = "auto" or "internal" 65 MOX6/MOX8 Owner's Manual