ZyXEL P-660HN-51 User Guide - Page 163
Static Route Edit
View all ZyXEL P-660HN-51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Chapter 12 Static Route Table 53 Advanced > Static Route LABEL DESCRIPTION Modify Click the Edit icon to go to the screen where you can set up a static route on the ZyXEL Device. Apply Cancel Click the Remove icon to remove a static route from the ZyXEL Device. A window displays asking you to confirm that you want to delete the route. Click this to save your changes. Click this to restore your previously saved settings. 12.2.1 Static Route Edit Use this screen to configure the required information for a static route. Select a static route index number and click Edit. The screen shown next appears. Figure 79 Advanced > Static Route: Edit The following table describes the labels in this screen. Table 54 Advanced > Static Route: Edit LABEL DESCRIPTION Static Route Setup Destination IP Address This parameter specifies the IP network address of the final destination. Routing is always based on network number. If you need to specify a route to a single host, use a subnet mask of 255.255.255.255 in the subnet mask field to force the network number to be identical to the host ID. IP Subnet Mask Enter the IP subnet mask here. Gateway IP Address Enter the IP address of the gateway. The gateway is a router or switch on the same network segment as the device's LAN or WAN port. The gateway helps forward packets to their destinations. Back Click this to return to the previous screen without saving. Apply Click this to save your changes. Cancel Click this to restore your previously saved settings. P-660HN-TxA User's Guide 163