2010 Jeep Commander Owner's Manual - Page 100

100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Turn on the radio and set the radio station presets (up to "Electronic Vehicle Information Center (EVIC) - to 12 AM and 12 FM stations can be set). Customer-Programmable Features" in Section 4 for more information. 6. Turn the ignition switch to the LOCK position and 12. Repeat the above steps to set the next memory remove the key. position, using the other numbered memory button, or to 7. Press and release the S (SET) button located on the link another RKE transmitter to memory. driver's door. Memory Position Recall 8. Within five seconds, press and release MEMORY button 1 or 2 on the driver's door. The next step must be NOTE: The vehicle must be in PARK to recall memory performed within five seconds if you desire to also use a positions. If a recall is attempted when the vehicle is not in PARK, a message will be displayed in the Electronic RKE transmitter to recall memory positions. Vehicle Information Center (EVIC). 9. Press and release the LOCK button on one of the RKE To recall the memory settings for driver one, press transmitters. MEMORY button number 1 on the driver's door, or the 10. Insert the ignition key, and turn the ignition switch to UNLOCK button on the RKE transmitter linked to the ON position. memory position 1. 11. Select Remote Linked to Memory in the Electronic Vehicle Information Center (EVIC) and enter Yes . Refer