2010 Jeep Commander Owner's Manual - Page 107

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 NOTE: If the windshield or SmartBeam™ mirror is To Deactivate replaced, the SmartBeam™ mirror must be re-aimed to 1. Pull back on the multifunction lever to manually ensure proper performance. See your local authorized deactivate the system (normal operation of high beams). dealer. 2. Pull back on the multifunction lever once again to To Activate reactivate the system. 1. Select "Auto High Beams" Refer to "Electronic Vehicle NOTE: Broken, muddy, or obstructed headlights and Information Center (EVIC) - Customer-Programmable taillights of vehicles in the field of view will cause Features" in Section 4 of this manual. headlights to remain on longer (closer to the vehicle). 2. Turn the end of the multifunction lever to the AUTO Also, dirt, film, and other obstructions (sticker, toll box, headlight position. etc.) on the windshield or camera lens will cause the system to function improperly. 3. Push the multifunction lever away from you (toward Automatic Headlight Leveling - HID Headlights front of vehicle) to engage the high beam mode. Only NOTE: This system will not activate until the vehicle is This feature prevents the headlights from interfering at or above 20 mph (32 km/h). with the vision of oncoming drivers. Headlight leveling automatically adjusts the height of the headlight beam in reaction to changes in vehicle pitch. 3