2010 Jeep Commander Owner's Manual - Page 45

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 Automatic Locking Mode - If Equipped In this mode, the shoulder belt is automatically prelocked. The belt will still retract to remove any slack in the shoulder belt. When to Use the Automatic Locking Mode The Automatic Locking Mode should be used anytime a child safety seat is installed in a second or third row seating position. Children 12 years old and younger should be properly restrained in a rear seat whenever possible. How to Use the Automatic Locking Mode 1. Buckle the combination lap and shoulder belt. As a guide, if you are shorter than average, you will prefer a lower position, and if you are taller than average, 2. Grasp the shoulder portion and pull downward until you will prefer a higher position. When you release the the entire belt is extracted. anchorage, try to move it up or down to make sure that 3. Allow the belt to retract. As the belt retracts, you will it is locked in position. hear a clicking sound. This indicates the safety belt is now in the Automatic Locking Mode. Adjusting Upper Shoulder Belt 2