2010 Jeep Commander Owner's Manual - Page 125
2010 Jeep Commander Manual
Page 125 highlights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 When the switch is pressed to disable the system, the instrument cluster will display the "PARK ASSIST DISABLED" message. Refer to "Electronic Vehicle Information Center (EVIC)" in Section 4 of this manual. When the shift lever is changed to REVERSE and the system is disabled, the instrument cluster will actuate a single chime, once per ignition cycle, and it will display the message. "SERVICE PARK ASSIST SYSTEM" appears in the EVIC after making sure the rear fascia/bumper is clean and free of snow, ice, mud, or other debris, see your authorized dealer. Cleaning The Rear Park Assist Clean the Rear Park Assist Sensors with water, car wash soap and a soft cloth. Do not use rough or hard cloths. Do not scratch or poke the sensors. Otherwise, you could The Rear Park Assist Switch LED will be ON when the damage the sensors. Rear Park Assist is disabled or defective. The Rear Park System Usage Precautions Assist Switch LED will be OFF when the system is NOTE: enabled. • Ensure that the rear bumper is free of dirt and debris Service The Rear Park Assist to keep the Rear Park Assist System operating propWhen the Rear Park Assist is defective, the instrument erly. cluster will actuate a single chime, once per ignition cycle, and it will display the "SERVICE PARK ASSIST • Jackhammers, large trucks, and other vibrations could affect the performance of the Rear Park Assist System. SYSTEM" message. Refer to "Electronic Vehicle Information Center (EVIC)" in Section 4 of this manual. If 3