2010 Jeep Commander Owner's Manual - Page 99

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 Setting Memory Positions and Linking Remote Keyless Entry Transmitter to Memory NOTE: Each time the S (SET) button and a numbered button 1 or 2 are pressed, you erase the memory settings for that button and store a new one. 1. Insert the ignition key, and turn the ignition switch to the ON position. 2. Press the driver door MEMORY button number 1 if you are setting the memory for driver 1, or button number 2 if you are setting the memory for driver 2. The system will recall any stored settings. Wait for the system Driver Memory Switches to complete the memory recall before continuing to Your vehicle is equipped with two RKE transmitters. One Step 3. or both RKE transmitters can be linked to either memory position. The memory system can accommodate up to 3. Adjust the driver's seat, recliner, and driver's sideview four RKE transmitters, each one linked to either of the mirror to the desired positions. two memory positions. 4. Adjust the brake and accelerator pedals to the desired positions. 3